• 07.05.2024, 23:43
  • Register
  • Login
  • You are not logged in.

 

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

SUSE9.1 vs. usb2.0hdd (ntfs)

Friday, December 17th 2004, 7:37pm

hi leute, hab hier grad ein linux installiert, soweit klappt eigentlich alles soweit ichs bisher einschätzen kann...
nur wenn ich meine externe festplatte einschalte kommt: Ordner /media/usb-storage-38E006CF19AD:0:0:0p1 lässt sich nicht öffnen
liegt das daran das es eine ntfs platte ist?
soweit ich gelesen hab kann linux zwar nicht auf ntfs schreiben, aber lesen kann es selbiges schon
linux ist SUSE9.1 (bitte keine "tips" ala hau suse weg und nimm was anderes, das hilft wirklich nicht weiter....)
und bitte, falls jemand was weiß so simpel wie möglich beschreiben ;)
thx, jo

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 1:10am

Hi

Normalerweise sollte auch schreiben mittlerweile problemlos funktionieren.

Schau mal bitte nach was ein "dmesg" beim Einstecken deine Festplatte sagt.

Cu Hurra

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 1:13am

Quoted from "hurra"

Normalerweise sollte auch schreiben mittlerweile problemlos funktionieren.


seit wann denn das?

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 1:20am

Mit captive gehts wohl schon etwas länger. Afaik gehts ejtzt aber auch über das normale Kernelmodul (bei neueren Kernels halt).
Auch gibts noch Paragon.

CU Hurra

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 1:37am

sorry die frage, aber was ist dmeg?
ich beschäftige mich heut zum ersten mal "richtig" mit linux, nimms mir ned überl falls ich alzublöde fragen stell :-/

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 9:20am

Hi

Du machst eine RootKonsole (wenn du in einer normalen Benutzerkonsole bist einfach mit "su" rüberwechseln) auf und dann einfach "dmesg" + <enter>

Cu Hurra

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 1:27pm

das isn riesen text :o
auf was muss ich da denn achten?
oder soll ich den hier komplett reinpasten?

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 1:53pm

Hi

Einfach mal demsg vor dem einstecken und nach dem einstecken. Den unterschied postet du dann hier (oder wennstus nicht schaffst einfach die komplette Ausgabe hier posten)



Ps: Sollte ca so aussehen:


Quoted

usb 1-4: new high speed USB device using address 3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: Model: USB DRIVE Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
sda: Unit Not Ready, sense:
Current : sense = 70 6
ASC=28 ASCQ= 0
Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x280x00 0x00 0x00 0x00 0x00
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete


Cu Hurra

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 2:18pm

irgendwie hab ich keinen unterschied zwischen den beiden malen finden können, hiermal der teil wo ich mir vorstellen könnte das du den meinst:

sb 2-1: new full speed USB device using address 2
usb 2-1: Product: USB2.0 Storage Device
usb 2-1: Manufacturer: Macpower
usb 2-1: SerialNumber: 38E006CF19AD
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
 Vendor: Maxtor 6  Model: Y200P0            Rev:  0 0
 Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
sda: assuming drive cache: write through
sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device sda1): parse_options(): Unrecognized mount option .
subfs: unsuccessful attempt to mount media (256)
NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device sda1): parse_options(): Unrecognized mount option .
subfs: unsuccessful attempt to mount media (256)
NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device sda1): parse_options(): Unrecognized mount option .
subfs: unsuccessful attempt to mount media (256)
NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device sda1): parse_options(): Unrecognized mount option .
subfs: unsuccessful attempt to mount media (256

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 2:37pm

Io,

deine Festplatte wird wohl sweit richtig erkannt. Problem ist der Automounter den du wahrscheinlich hast. Du siehst, wie er 4x versucht die Festplatte zu mounten.

Da ich keinerlei Erfahrung habe, welche Zugriffsmethode die Beste ist, und welche Suse verwendet muss ich an dieser Stelle passen.

Ich bin sicher die anderen LinuxKenner können dir hier weiterhefen. Wenn nicht, einfach mal bei linuxforen.de suchen/fragen.

Cu Hurra

Re: SUSE9.1 vs. usb2.0hdd (ntfs)

Saturday, December 18th 2004, 2:54pm

ok, danke schonmal soweit :)