• 23.05.2012, 14:40
  • Register
  • Login

  • You are not logged in.

 

Whether repair my pump?

Cyberdyne

Junior Member

Posts: 6

Whether repair my pump?

Tuesday, August 11th 2009, 6:02pm

Confronted with an issue. Improperly connected cable USB pulling the +5 V is on the other connector (Pin 4 D-). Then, of course, ceased to operate the software. I want to ask - my pump is beyond repair or electronics will not recover?
I lifted the hood and checked all the diodes. This diode was burned. Unfortunately, I do not know what the face value can be replaced. Here is his picture:


Please forgive me for my English - it is not my native language. I look forward to a reply.

This post has been edited 1 times, last edit by "Cyberdyne" (Aug 11th 2009, 6:06pm)

Cyberdyne

Junior Member

Posts: 6

Wednesday, August 19th 2009, 11:32am

?

Defence1

Senior Member

Posts: 754

Friday, August 21st 2009, 8:44am

Hi,

send it over to Aqua Computer, they can repair your pump. you can fix it even by yourself, simply change the diode.. The type can be named by Aqua Computer....
Mein System:
ASUS Crosshair II, AMD Phenom II X4 940 BE, ASUS GTX 295, CREATIVE X-FI Elite Pro, Silverstone RAVEN, Aquastream XT USB Ultra, Aquaero, Dualradi, MO-RA, Graka wassergekühlt, CPU wassergekühlt.

Cyberdyne

Junior Member

Posts: 6

Monday, August 24th 2009, 6:03pm

Thanks, I'll try to replace the diode itself. Are transferred to other countries are very far (and expensive).

Cyberdyne

Junior Member

Posts: 6

Monday, August 24th 2009, 6:07pm

Sven - thank you for additional information, I hope it will help

PvHooijdonk

Junior Member

Posts: 13

Tuesday, August 25th 2009, 2:17pm

The same thing happened to me some time ago.
Due to the fact that I did not notice in time that the colouring of the usb wiring was different than standard.
I tried to change the zener-diodes myself but was unsuccesful.
I ended up buying a replacement print plate for the pump via AC.
Professional Crasher :thumbsup:

kolsols

Unregistered

Saturday, September 12th 2009, 7:54am

yes pf course simply replace your burnt diode with a new one and your pump would be fine.

Cyberdyne

Junior Member

Posts: 6

Monday, September 14th 2009, 8:56pm

I ordered a new diode - it will be soon to come. After replacing the diode, I will inform the result of repair

mans123

Unregistered

Thursday, September 24th 2009, 9:06am

hope it would be fine.

copcop

Unregistered

Monday, October 12th 2009, 11:53am

I think you should buy a new one instead of repairing it. :P

Top_Nurse

Senior Member

Posts: 999

Tuesday, October 13th 2009, 3:06am

Quoted from "copcop"

I think you should buy a new one instead of repairing it. :P


Why? There easy to fix. :thumbsup:

funkyfresh123

Unregistered

Friday, October 30th 2009, 10:54am

just try to repair it...as it would be cost effective.

Cyberdyne

Junior Member

Posts: 6

Sunday, November 8th 2009, 10:16am

Replacing the diode has not helped. Died controller (((

The controller has been filled with resin. Had some work to clean it.
The question now is - if I changed to a working chip (ATMEL), will need special firmware or will be enough this - aquastream XT-Firmware 1.09, DIY-Flasher?

This post has been edited 1 times, last edit by "Cyberdyne" (Nov 8th 2009, 10:29am)

Shoggy

Sven - Admin

Posts: 16,089

Monday, November 9th 2009, 4:35pm

That will not work in any way...

You will need a completley different firmware.

brianmoore123

Unregistered

Wednesday, November 11th 2009, 11:55am

Quoted from "Cyberdyne"

Replacing the diode has not helped. Died controller (((

The controller has been filled with resin. Had some work to clean it.
The question now is - if I changed to a working chip (ATMEL), will need special firmware or will be enough this - aquastream XT-Firmware 1.09, DIY-Flasher?
I think someone has already advised you not try to repair

Similar threads