Got Poweradjuster 2 starndart version today and first of all i could not believe there is NOT english manual in box. Only german. Nothing wrong with german, but all the rest of the world needs at least english manual same as ANY other product on the market. I am not native english speaker, but english manual would do me fine. Nightmare with german dictionary started an hour ago, got it connected to my pc and to my pump. Red light is on, but pump wont work when i turn the pc on. (pump is working fine when conected to molex directly)


Windows says cant find driver for usb device. There is no cd in box with driver if i really need any, there is not driver on your website, so what the hell ya want me to do? I installed Auquasuite 4.7.2 same as Auquasuite 2012 - both of them useless. When i click on find usb device, nothing will happen.

I did not know i will have such a pain with this. The easy set up giude for Laining pump would be great also...

Quoted from "bcikota"

Hi NotHaPPy,

Yup, the lack of the English manual is a pain.

I could have also used an installation/assembly manual for the front plate for the Poweradjusts, in the end I basically used photos from the online shop to figure out how many washers I need and where.

Anyway, check that your USB cable is connected properly. Pin 1 (red wire) on the Poweradjust USB connector is the one closest to the Aquabus connectors and the temperature sensor connection. Also, check the USB connection on your motherboard.

There is no driver for the Poweradjust, it is a standard USB device, Windows has all that it needs for it.

Disconnect the Aquabus connection if you have it connected, connect the Poweradjust only over USB and start Aquasuite 4.72, that is the one that you need to set it up.

Your pump is off, probably because the default state of the Poweradjust output is off (0).

Kind regards,
Boris.

Thanks for answer, i have it connected right also on mainboard, but still not recognized. Now after reboot it doesnt even say it is not recognized. Red light is on, but thats all. Doesnt matter if i connect output to pump, am finished with it. Time for RMA