Sie sind nicht angemeldet.
USB Kabel falsch angesteckt?
Habe ich genau so ausprobiert, aber Netzteil schaltet sich trotzdem aus. Ich glaube, das Farbwerk ist kaputt. Habe mir ein neues bestellt.Wenn sich das Netzteil mit einem Klack ausschaltet, dann hat sich eine Schutzschaltung aktiviert.
Es liegt mit hoher Wahrscheinlichkeit ein elektrischer Kurzschluss vor.
Teste mal das Farbwerk ohne angeschlossene Komponenten. (kein usb, kein Splitty 12, nur mit Molex Stromstecker).
Wenn sich der PC dann auch ausschaltet, dann ist das Farbwerk kaputt.
I think the Farbwerk is broken. I tested it with just the Molex conntected to the Farbwerk and the PC won't turn on.I would disconnect everything from the Farbwerk360 but Molex 4-pin power. See if the computer will power up. If it won't power up, either the Farbwerk is bad or the Molex cable is bad. If it does power up, power down and connect the USB cable. Do the same test. If it will power up with the Molex power cable and USB cable attached, boot into Windows and see if the Farbwerk shows up in Aquasuite. If it does, power down and connect one RGBpx cable. Try to power up. If that works, power down and plug in the next RGBpx cable. Repeat until you find the specific cable that causes the problem. Maybe there is a bad connection or a short in the RGB cabling.
Am Farbwerk selber kann man den USB-Stecker ja nicht falsch herum reinstecken.
? Da ist Rot angeschrieben aber das heißt doch nicht das man nicht kann.
Schau dir mal den Molex genau an, wie Speedy-VI sagt. Die Molex Anschlüsse sind du ein Glump.
-