Thanks for the reply, that sounds great. I will look into soldering the wire, but as long as I have a flow meter im fine with no RPM signal. I will look into that flow meter, and the 400 and pick between the two. Again, thank you for the reply. Zitat von »Jakusonfire« It should all work fine. If you have basic soldering skills it should be possible to add an RPM wire to your pump. If you google it there is at least one guide that shows you where to solder the wire on the pump PCB. The back of th...

My setup consist of two 120x 3 rads (6 120mm pwm fans in push only for now), 4 intake 120mm (3pin), one 140mm exhaust (3 pin), and a swiftech mpc-655 pump (molex 2 pin power) in a corsair 900d. Im going to order the A6 when it becomes available from frozen CPU. My plan: Fan channel #1: 3x 120pmw (radiator #1) #2: 3x 120pmw (radiator #2) #3: 4x120 and 1x140 non-pwm #4: Pump (molex 2 pin)...Now when it comes to the pump... I was able to aquire a molex to 3 pin (female) so the A6 can power the pump...