• 14.12.2019, 07:14
  • Register
  • Login
  • You are not logged in.

 

Search results

Search results 1-50 of 162.

Tuesday, August 6th 2019, 8:32pm

Author: Railgun

VISION terminal with active back plate LEAK!

AC folks. What was the cause for the redesign/lengthy delay for the title part? I'm finally getting around to installing my card and to my dismay, the thing leaks like a sieve where that part meets the main block. I'm about to dismantle it for the THIRD time to see if I can finagle it to work. The gasket is pretty much too thin really. Is this a known issue you're working through? I'd highly recommend a larger gasket there. In my several years of WCing, something like this has never been an issu...

Saturday, July 20th 2019, 2:52pm

Author: Railgun

Aqualis XT base upgrade to Aquainlet

Never mind. I see the “problem” with this.

Saturday, July 20th 2019, 2:06pm

Author: Railgun

Aqualis XT base upgrade to Aquainlet

AC folks, I currently have an Aqualis XT 450 ml that has been installed for the past 3+ years. Love the thing. I have it feeding a dual DDC pump, but am looking to simplify and move to an Aquastream Ultimate. However, I don’t see anything to facilitate using the res with a direct pump mount. There are other, smaller options, but I already have a reservoir, don’t need nor want another, smaller setup. What options do you have here?

Sunday, July 14th 2019, 10:10pm

Author: Railgun

ETA of new 2080ti blocks

I was lucky enough to find the block elsewhere a while ago. My comment was specific to the vision for the active back.

Thursday, July 11th 2019, 4:46pm

Author: Railgun

ETA of new 2080ti blocks

Finally! Guess you didn't want to reach that 90 day mark, eh? Now that I get to finally use my card that's been collecting dust. And here I thought things were efficient over there.

Wednesday, June 12th 2019, 9:27am

Author: Railgun

ETA of new 2080ti blocks

And there’s 60 days. Your site still claims 30 days. What’s going on here?

Friday, May 17th 2019, 11:11am

Author: Railgun

ETA of new 2080ti blocks

Any ideas on what’s happening to your manufacturing?

Sunday, May 12th 2019, 9:26am

Author: Railgun

ETA of new 2080ti blocks

Any updates Aquacomp folks? The first 30 days is up here. Looking specifically for the vision.

Saturday, April 13th 2019, 8:38am

Author: Railgun

ETA of new 2080ti blocks

I’ve been informed there was a manufacturing issue. The block should be ready soon. The vision maybe not as soon as there was some glass issue. What specifically they didn’t say. So we’ll see.

Saturday, April 13th 2019, 8:37am

Author: Railgun

RGBpx future

I’m going to try to rig one up once I receive mine.

Friday, April 12th 2019, 1:32pm

Author: Railgun

ETA of new 2080ti blocks

Not looking for delivery times, just product availability which isn’t order specific.

Friday, April 12th 2019, 11:38am

Author: Railgun

ETA of new 2080ti blocks

Some have suggested that they’ve been waiting a bit for the new 2080 blocks. Just looking for an eta generally speaking as I’ve ordered the block, active back and corresponding vision terminal. Are we really looking at a 30 day lead or less? TIA

Friday, April 12th 2019, 11:19am

Author: Railgun

RGBpx future

Thanks. I guess I’ll give it a go.

Friday, April 12th 2019, 9:30am

Author: Railgun

RGBpx future

And can that mount to the pre-existing bezel for the old versions? And does it have a status light as the pre-existing PAs? No, doesn’t look like it can. It looks as though it has to mount to the side of a wall. While there’s this idea to kill off 5 1/4 drive bay things, would it have been that difficult to design this to be compatible with your existing ecosystem?

Thursday, April 11th 2019, 5:33pm

Author: Railgun

RGBpx future

Cool. That said, any ETA of a Poweradjust 4, new farbwerk that can control old and new strips that will work with the existing bezel?

Thursday, April 11th 2019, 11:41am

Author: Railgun

RGBpx future

So I’ve just purchased a block for a 2080ti. I’m running 2x 6XTs, 2x PA3 Ultras and a Farbwerk. Needless to say, I have no RGBpx interface at the moment. I’m going to assume, and hope, that the AQ7 in whatever form will have a native RGBpx interface. In the meantime, it looks as though I’m stuck with a native interface on the MOBO (RVE) as the only AC options are a farbwerk 360, QUADRO, or splitty 4, the latter of which is redundant as I don’t need more fan outputs and I don’t want the former; y...

Wednesday, March 20th 2019, 1:42pm

Author: Railgun

RE: RE: RE: What cases are people using that have good access to the Aquaero?

Quoted from "SverreMunthe" I'm using a monster radiator (Mo-Ra3) and want it mounted inside the case (with pull-push), That's what I use, though only push. If I were to go push-pull, I'm pretty sure I'd still have room. That's odd they wouldn't help. They were more than happy to take my money. I'm using the horizon tray with a custom bracket and a custom front and back panel to specifically fit the MO-RA and some other things (140mm fan instead of 120mm for a larger HDD bracket for the rear). S...

Tuesday, March 19th 2019, 8:15pm

Author: Railgun

RE: What cases are people using that have good access to the Aquaero?

Quoted from "SverreMunthe" I have used MountainMods earlier, but they are expensive, not very good looking, and the transport from the US easily adds over $100 to the price tag. Ha. Don’t I know it. But necessity is the mother of ...necessity? For me I didn’t care about aesthetics, rather function. But of course I had many custom parts made....so yeah...it wasn’t cheap getting to the UK. But it works and will continue to work for me for years. Of course, the exchange rate was much better then. ...

Thursday, March 7th 2019, 3:18pm

Author: Railgun

Aquaero 6 Pro with dual D5 options

I run a dual DDC with 21 fans (most being GT AP-15s). What do you need to know? If you know the specs of the fans, and you already have the specs of the Aquaero, you’ll have all you need to know.

Wednesday, February 13th 2019, 5:51pm

Author: Railgun

Aquasuite Update frequency?

Learn the difference between why and what. Did I ask a why question? I don’t care why you want to do it. Also, look at what happens to your CPU. Try holding F5 to ramp up the polling interval and see what happens. The Aquaero isn’t polling directly (AFAIK) and is probably reliant on WMI. There will probably be a performance hit on polling at that interval. Additionally, as I alluded to, transfer is measured in bps or Bps. There’s no reason to get more granular. If you were looking at network sta...

Wednesday, February 13th 2019, 4:53pm

Author: Railgun

Aquasuite Update frequency?

What are you measuring? IOPS? Throughput in Xbps? The clue is in the name. A sub-second measure of disk utilization will provide what exactly? Latency for each request? There are diminishing returns polling that frequently, probably inducing latency on the controller asking it every 100ms what it’s doing about other requests.

Friday, February 1st 2019, 7:07pm

Author: Railgun

aquasuite panel

Looks pretty slick. I’ve been playing with Grafana a lot lately for some work related...work... While I’m sure that you can tweak the AS panel to a degree, I’d love to know whether the data can be exposed and pulled into an external tool as above to also rope in other metrics for a true single pane of glass.

Saturday, January 12th 2019, 9:07am

Author: Railgun

Aquaero 6 low voltage and overcurrent

I’ve had similar issues in the past and it was RMA’d. Just open a ticket.

Tuesday, September 11th 2018, 9:52pm

Author: Railgun

Aquaero kinda sorta feature request-OLED display

I'm going to take a stab (and hope) that the next version of Aquaero will come with an OLED display instead of the current incarnation. Can we please make sure that the display itself is either a) a pixel match for the current display or b) don't rewrite the FW to a degree that it wouldn't/couldn't be backward compatible for the Aquaero 6? While there are filters available for the display, I'm at a sharp angle to it and, as it's LCD, it's very difficult to read. Or...if anyone knows of a source ...

Monday, September 10th 2018, 9:10pm

Author: Railgun

Using other brand flow meters with Aquaero 6 or Poweradjust.

Might be possible. It wasn’t possible to slave another aquaero and use it for PWM fans...and then it was. Just wait a while.

Sunday, August 12th 2018, 7:35pm

Author: Railgun

Sad Day for PC Enthusiasts

I’d be curious to how Mountain Mods are faring. I was on the fence between the two companies, and ended up with MM, but always liked case labs as a potential new idea. Oh well... One drops, another one will come around.

Thursday, November 30th 2017, 10:59pm

Author: Railgun

aquasuite display consideration

You said the same thing about a 6 slave leveraging PWM fan headers...

Tuesday, February 14th 2017, 11:16am

Author: Railgun

Aquaero 6 full configuration on dual loop

Looks good provided the total number of fans chosen don't draw more than each individual channel provides.

Tuesday, February 14th 2017, 11:12am

Author: Railgun

Aquaero 5 and 6 Display Question

Given you can retrofit an xt or pro to an LT, yes. It's only firmware that's the real difference. The HW is the same. Whether a 5 screen will work with a 6 base unit...I've not seen a 5 up close so I can't comment. I have two 6s, one of which I've flipped back and forth to an LT.

Sunday, February 5th 2017, 10:52pm

Author: Railgun

Fan channel over current alarm

With everything disconnected and a power cycle, it still gives the condition? If so, I had the same issue and needed to RMA it.

Monday, December 19th 2016, 8:41am

Author: Railgun

Feature request for Aquareo 6 as slave

So it's possible after all then?

Monday, December 19th 2016, 8:36am

Author: Railgun

Slave a A6 Pro to an A6 Pro?

You can make any non-LT to an LT. the difference now is that the 6s can leverage PWM.

Tuesday, December 6th 2016, 8:58am

Author: Railgun

Better definitions of built in HW monitors in 2017

This falls in the bucket of a feature request for what we're paying for now. One of the features that's been particularly noted is the built in hook to HW temp sensors. While all well and good, in my case (Asus RVE) I have several that simply show up as "motherboard." Five or six of them. I'll post a screenshot when I get home tonight. While I appreciate that there is a lot of HW, leaving these in a generic state doesn't really buy anyone anything. Please don't implement something and leave it i...

Sunday, November 27th 2016, 11:34am

Author: Railgun

Aquasuite is no longer free?

Quoted from "Shoggy" we also do not want to give our competitors an insight on what we are doing and planning for the future. While I appreciate that, what competition? Without sounding like I'm blowing smoke up your collective asses, as far as I know, there isn't much, if any that is comparable to the Aquaero and its software. Perhaps there something on the commercial side that I'm not privy to, on the consumer side I explicitly picked this product because there was nothing else that was suita...

Saturday, November 26th 2016, 9:43pm

Author: Railgun

Aquasuite is no longer free?

Yay...everyone gets a "free" 2016 license...with one month left to go for 2016. Not taking into account how grandfathering a licensing model screws some folks up, how about since some of us now have to pay for being "allowed" to use the software that we already paid for, you produce a roadmap/release schedule. Why would we pay for a license for something that doesn't do anything above and beyond what we want going forward?

Wednesday, November 23rd 2016, 3:40pm

Author: Railgun

New: VISION - Always everything in sight

Quoted from "SverreMunthe" I'll definitely buy this when the blocks can transmit the data wirelessly to a unit I can connect to my Aquaero. That's magic.

Sunday, November 20th 2016, 11:50pm

Author: Railgun

Will there ever be a Poweradjust with 4 pin PWM?

Actually, the problem is there is no PA that does PWM. Explanation of what it is/does is way OT.

Wednesday, October 26th 2016, 9:36am

Author: Railgun

Cleaning an Aqualis glass reservoir with nano coating

What /\ said. Though in my case, a stained carped was my motivation. Though that doesn't help you. The MSDS, funnily enough, missed the key point of what's used for the coloring itself. That said, perhaps soak in a light bleach solution.

Tuesday, September 13th 2016, 1:54pm

Author: Railgun

Using dual Aquaero 6XTs

A switch to select RF or IR? Magic 70 years ago maybe.

Saturday, September 3rd 2016, 9:57am

Author: Railgun

Power adjust 3 status LED colour.

It's in English too. Power adjust/farbwerk red

Sunday, March 27th 2016, 7:14pm

Author: Railgun

4 pin fan splitter

Didn't look hard enough. Search mmt-pcb-4p-44p

Friday, February 26th 2016, 6:00pm

Author: Railgun

Aquaero 6XT and Poweradjust 3 help Please

I had started to type up cable this, cable that. But glad you got it worked out. And thanks for the offer. I'm all dressed in black so no worries.

Friday, February 26th 2016, 3:15pm

Author: Railgun

Farbwerk Rev. 2 issue: not able to handle more than 2 led strips // channels

Ahh. Yeah, there should be no issues there. I use 3x 30cm Phobya strips with no issue. I had four, but after I redid my case, I just never put the fourth back. No issues there with it. What kind of troubleshooting did you do? I assume took one that you know works and move it to the other channels? Take one that didn't work, and move it to a channel that did work? Regardless of where they are, only two will light? If so, that sounds like a farbwerk issue then.

Friday, February 26th 2016, 2:58pm

Author: Railgun

Aquaero 6XT and Poweradjust 3 help Please

Any chance we can see how you physically have it setup? What cables, etc.

Friday, February 26th 2016, 2:35pm

Author: Railgun

Aquaero 6XT and Poweradjust 3 help Please

I'm using a splitter from modmytoys.

Friday, February 26th 2016, 12:22pm

Author: Railgun

Farbwerk Rev. 2 issue: not able to handle more than 2 led strips // channels

Keep in mind, it's 2.5A per color channel TOTAL, across all four ports, not per port. You have four ports, and across those four ports you have 2.5A of red, 2.5A of green, etc. It's not how you're powering it via the PSU. In most cases, that will never be an issue. It's how much load the farbwerk itself can handle. Again, what are the specs of the strips you have. Make, model, length, etc... While 2.5A does seem like a lot, it's not hard to even have three LEDs that can pull that kind of current...

Friday, February 26th 2016, 9:39am

Author: Railgun

Farbwerk Rev. 2 issue: not able to handle more than 2 led strips // channels

What are the specs of the strips. What is each strip's length? I'm with jack in that you're probably pulling too much.

Friday, February 26th 2016, 8:59am

Author: Railgun

Aquaero 6XT and Poweradjust 3 help Please

I still don't think your address assignments have been changed. Please plug in all three via usb only if you can and show the address assignments for each. If you can't do all three, one by one is ok. The image above has the default address. Don't know if that's what it's supposed to be but I want to see the change.