• 17.09.2019, 12:28
  • Register
  • Login
  • You are not logged in.

 

Search results

Search results 1-34 of 34.

Wednesday, July 10th 2019, 12:30am

Author: Undesirable

New: aquasuite X

Quoted from "InfoSeeker" Quoted from "sebastian" Version X4, with updated hardware monitoring is online. Now we have a better NVMe and HDD support. Changelog on page 1. Mhmm, I have aquasuite set to 'Minimize at startup', and to 'Minimize to system tray'. The unfortunate result is I do not see the flag in aquasuite advising update availability. Is it possible for aquasuite to have Windows throw a notification banner also? It only showed up when I checked 'Notify about new insider versions'.

Saturday, March 30th 2019, 7:24am

Author: Undesirable

USB problems with current AMD chipsets (X370/X399)

As I said 1 year and 10 months ago on these forums, Aquasuite Installation cannot detect even ONE SINGLE DEVICE (AQUAERO 6) CONNECTED TO THE HUB with the Crosshair 6 x370 and Hubby 7 internal USB hub. Aquaero 6 Not Detected with Hubby 7

Monday, March 25th 2019, 5:38am

Author: Undesirable

What cases are people using that have good access to the Aquaero?

Quoted from "SverreMunthe" Quoted from "GTXJackBauer" I use a Corsair 900D that gives you some bays in front. Just click the side panels off and remove the bay screws and wallah! Way too small. I have it out in the shed somewhere. I would like a cube of some sort. Ooh, indeed sir. Then you should be able to pull a Caselabs Magnum THW10A out from under the bed.

Friday, October 12th 2018, 11:52pm

Author: Undesirable

RE: RE: RE: Aquaero kinda sorta feature request-OLED display

Quoted from "Andrew LB" Quoted from "Undesirable" Quoted from "Railgun" I'm going to take a stab (and hope) that the next version of Aquaero will come with an OLED display instead of the current incarnation. Can we please make sure that the display itself is either a) a pixel match for the current display or b) don't rewrite the FW to a degree that it wouldn't/couldn't be backward compatible for the Aquaero 6? While there are filters available for the display, I'm at a sharp angle to it and, as...

Friday, September 14th 2018, 4:37am

Author: Undesirable

RE: Aquaero kinda sorta feature request-OLED display

Quoted from "Railgun" I'm going to take a stab (and hope) that the next version of Aquaero will come with an OLED display instead of the current incarnation. Can we please make sure that the display itself is either a) a pixel match for the current display or b) don't rewrite the FW to a degree that it wouldn't/couldn't be backward compatible for the Aquaero 6? While there are filters available for the display, I'm at a sharp angle to it and, as it's LCD, it's very difficult to read. Or...if an...

Tuesday, July 10th 2018, 12:30pm

Author: Undesirable

NEW: aquasuite 2018

Quoted from "Shoggy" RAM usage does not look unusual to me. Do you remember the values that you had with the old version? It all seems fine. I was just reporting what I see really; I'm very happy with the new version.

Sunday, July 8th 2018, 4:45am

Author: Undesirable

NEW: aquasuite 2018

With AquaSuite 2017 I was getting constant 1% processor usage of my 16-core AMD Threadripper 1950x @ 4GHz, now with AquaSuite 2018 I get 0.1 - 0.6% usage (same with both the application and service) but the RAM usage on aquasuite.exe loops incrementally between 150 - 200MB and AquaComputerService.exe between 38-50MB.

Friday, March 16th 2018, 1:30pm

Author: Undesirable

Aquasuite does not detect aquaero connected via USB HUB

Yours will very likely work, because you have a different motherboard to us, Bartdude. Why should the hubs be incompatible with just the Crosshair 6 and some AC devices? I don't know.

Friday, March 16th 2018, 12:16am

Author: Undesirable

Aquasuite does not detect aquaero connected via USB HUB

Quoted from "Revan654" Quoted from "Undesirable" Pin alignment is the first thing I checked. USB works fine plugged into motherboard header without Hubby, doesn't work with Hubby. Pins are fine! 5 different people couldn't all get it wrong. I would check your motherboard manual to make sure it matching up correctly. Sometimes there soldered to the board upside down. If you willing I would grab one of these: https://shop.aquacomputer.de/product_inf…roducts_id=3388 to see if it powers up from one...

Wednesday, March 14th 2018, 5:03am

Author: Undesirable

Aquasuite does not detect aquaero connected via USB HUB

Pin alignment is the first thing I checked. USB works fine plugged into motherboard header without Hubby, doesn't work with Hubby. Pins are fine! 5 different people couldn't all get it wrong.

Monday, March 12th 2018, 6:18am

Author: Undesirable

Aquasuite does not detect aquaero connected via USB HUB

Quoted from "InfoSeeker" ms something niggles in the back of my mind about dissimilar grounds for the 12/5 volt plugs in Well at least you're trying to help us. I'm almost certain it's an incompatibility with Crosshair 6 motherboards and USB hubs + some AquaComputer devices. 4 people have the same issue with this motherboard (well, 3 confirmed in this thread and 1 unknown motherboard + USB hub).

Tuesday, February 27th 2018, 10:21pm

Author: Undesirable

Aquasuite does not detect aquaero connected via USB HUB

Quoted from "Dundys" Strange! its been a while and no support from AQ at least in here, its been very quiet let alone no word why they discontinued their USB D5if they did they should announce something in regards Where did you hear that they'd been discontinued? No doubt AquaComputer would respond to a support ticket, but be prepared to be asked if your USB cables are attached correctly for the billionth time.

Sunday, February 25th 2018, 8:12pm

Author: Undesirable

Aquasuite does not detect aquaero connected via USB HUB

Quoted from "GTXJackBauer" Something might be wrong with the Aquaero then. I would test it once more with the new MB and go from there. It seems unlikely that two different Aquaeros from two separate people (please bear in mind I'm not the original poster) would malfunction in exactly the same way as to not be visible when plugged into internal USB hubs. More likely it is an specific incompatibility with the ASUS Crosshair VI motherboard and USB hubs. Don't forget the Aquaero works when plugged...

Sunday, February 25th 2018, 12:50am

Author: Undesirable

Aquasuite does not detect aquaero connected via USB HUB

This thread is more confirmation that the Aquero isn't detected with ASUS Crosshair VI & USB hubs. I have an older thread about it here: Aquaero 6 Not Detected with Hubby 7 The above thread includes the usage of an AquaComputer Hubby, so that appears to rule out the hub type making a difference. It is essential that some form of USB hub is used with the Crosshair VI, as it only has a single USB 2.0 header. So if the Aquaero is plugged in without a hub, you cannot have a USB 2.0 front panel conne...

Tuesday, June 13th 2017, 7:34am

Author: Undesirable

Aquaero 6 Not Detected with Hubby 7

Quoted from "InfoSeeker" Quoted from "Undesirable" For direct connection, I remove the USB cable that is plugged into port 1 of the Hubby 7 in the video (the cable used is the long one bundled with the Aquaero), remove the short cable attached from the Hubby 7 to motherboard, then plug the cable that was in port 1 of the Hubby 7 into the motherboard header. I know the Hubby 7 + Aquaero setup should work, because it works in the same configuration with my Aquastream XT. I have also tried all the...

Monday, June 12th 2017, 6:36pm

Author: Undesirable

Aquaero 6 Not Detected with Hubby 7

Quoted from "Bartdude" You maybe correct, I have read several posts about problems with USB and the X370 chipset. Those screenies you took in your first post, they were while the Aquaero was connected through the Hubby7? Can you actually install the Aquaero with a direct connection to the MB, including see it In Aquasuite with a valid license? Just trying to eliminate possible problems. Yeah everything works perfectly with direct connection to the motherboard. I need the Hubby 7 because I only ...

Monday, June 12th 2017, 12:51am

Author: Undesirable

Aquaero 6 Not Detected with Hubby 7

Quoted from "InfoSeeker" Your video show the cable to the Hubby7 is connected correctly and the jumper is set correctly. I am curious, for the direct connect test, which cable did you use between the aquaero and the motherboard USB port? - the cable from your aquaero to the Hubby7? - or the cable from the mobo to the hubby7? For direct connection, I remove the USB cable that is plugged into port 1 of the Hubby 7 in the video (the cable used is the long one bundled with the Aquaero), remove the ...

Saturday, June 10th 2017, 11:10pm

Author: Undesirable

Aquaero 6 Not Detected with Hubby 7

So, does anyone have an AM4 motherboard and Hubby 7 with Aquaero plugged in?

Friday, June 9th 2017, 4:10pm

Author: Undesirable

Aquaero 6 Not Detected with Hubby 7

Strange thing is anything else I plug in to the Hubby 7 is recognised, including an Aquastream. You would think that rules out the Hubby being at fault. Take a look at the very first screenshot I attached in the original post. At the bottom you can see something called "Aquaero" is picked up in Aquasuite Installation, but it still doesn't register as a licensed device or show up in Aquasuite when it completes installation. It has a valid license and shows up correctly when plugged into the mothe...

Friday, June 9th 2017, 1:28am

Author: Undesirable

Aquaero 6 Not Detected with Hubby 7

I have tested all ports on the Hubby 7, 1-7 now, and none of them pick up my Aquaero 6 Pro in Aquasuite either with SATA or USB power. Video to prove it here: https://www.youtube.com/watch?v=UtfaJHVuWTE&feature=youtu.be Photo attached to show it's installed correctly. Could this be a firmware issue with the Aquaero 6 Pro version 2009 specifically with Aquasuite version 2017-2?

Wednesday, June 7th 2017, 6:03am

Author: Undesirable

Aquaero 6 Not Detected with Hubby 7

Quoted from "Bartdude" I have the same setup and it works fine, only difference is i'm not using sata power. I have connected the MB to the IN on the hubby and then connected the aquaero to position one on the hubby and it all works fine. When I get home i'll attach a photo Hmm, are you using the latest firmware and Aquasuite version? I'm running and Aquaero 6 Pro with firmware 2009 and Aquasuite 2017-2. I thought I tried a different port on the Hubby, but maybe I forgot to do that. I'll try a ...

Wednesday, May 31st 2017, 7:22pm

Author: Undesirable

Aquaero 6 Not Detected with Hubby 7

It was connected, but via Hubby 7. Now I have connected it directly via the motherboard instead of via Hubby 7 it works. I wasn't using Hubby 7 with my old motherboard. If I use Hubby 7 with SATA power, Aquaero 6 is not detected correctly for me. Other USB devices WERE detected via Hubby 7. I need an internal USB hub now, because I only have 1 header instead of 2. Aquastream XT pump was correctly detected with Hubby 7, Aquaero 6 wasn't.

Wednesday, May 31st 2017, 6:47pm

Author: Undesirable

Aquaero 6 Not Detected with Hubby 7

Hi, I switched from Intel Z87 (Haswell) platform to AMD X370 (Ryzen) and my Aquaero 6 is not detected as a valid Aquasuite device via. USB. The only place I can see it is in the installation screen, where it is listed as "Aquaero". It does not show up at all in Aquasuite as a device, as you can see in the below screenshots. I have a valid Aquasuite 2017 license attached to the Aquaero 6. It was working correctly on the Intel Z87 platform. [attach]6069[/attach] [attach]6070[/attach]

Monday, February 27th 2017, 3:55pm

Author: Undesirable

First time user, problem with Aquastream XT

Looks like it needs to be squeezed on the AquaInlet side, but it seems to be rigid acetal. If you can't squeeze it then you need to poke the clips with something fairly soft so it won't damage them. I am aware of all the double entendres above.

Friday, February 24th 2017, 4:37pm

Author: Undesirable

CPU Waterblocks AM4 Ready?

Greetings. Are Aqua Computer ready for AMDs new line of processors? Are we going to be able to purchase a backplate for Cuplex blocks that will allow them to fit the AM4 platform, for instance?

Thursday, January 5th 2017, 3:13pm

Author: Undesirable

New: aquasuite 2017 licensing system

When you install Aquasuite, it checks each Aquacomputer USB connected device on that machine for a licence. If it finds one, then all other devices in that machine are able to make use of the latest Aquasuite version on that one machine, even though they may not qualify. So at least one of the devices in each machine will need a licence.

Wednesday, December 14th 2016, 4:49am

Author: Undesirable

Aquastream XT Randomly Failed to Connect to USB

Well, it happened again. I've come armed with a screenshot this time. Haven't changed anything about my config. Most of the time it works, but I'm afraid it's not really reliable enough for me to use as a water temperature sensor, which is a shame because I upgraded the pump to the ultra version for that purpose. [attach]5907[/attach] I'm running Microsoft Windows [Version 10.0.14393] with all the latest updates installed, and the latest Aquasuite 2017. Update: Rather than restart my computer, I...

Thursday, December 8th 2016, 6:03pm

Author: Undesirable

Aquastream XT Randomly Failed to Connect to USB

Unfortunately I don't have another internal USB header free, so I might have to buy an internal USB expansion board or wait until the new year and possibly buy a new Zen motherboard. The header that the pump is connected to only has 4 pins instead of 5, please see this thread: Aquastream XT USB Motherboard Header Connection Question I was told that it didn't matter and the pump would still work fine, which it does for the most part.

Tuesday, December 6th 2016, 1:08am

Author: Undesirable

Aquastream XT Randomly Failed to Connect to USB

Hi there, My Aquastream XT suddenly showed as disconnected in Aquasuite, and when I checked Device Manager in Windows, there was an exclamation mark over the Aquastream device in Human Interface Devices which said it had failed to start, even though the pump was running. Now that I can assign the Aquastream's Water Temperature reading as a source for controlling curves in Aquasuite 2017, when it failed to start it caused my alarms to go off (because the temps were set to the default 50°C) and th...

Monday, October 5th 2015, 12:37pm

Author: Undesirable

Aquastream XT USB Motherboard Header Connection Question

That device looks handy, but I would rather stick with what I have for the sake of tidiness if it is indeed possible to plug the pump's 5-pin USB cable into the 4-pin header. It looks to me as though the USB cable has 5 wires, 2 of which are 'GND'; whereas the motherboard header that I've pointed out only has 4 pins, and there is only 1 'GND'. The 5-pin USB motherboard header on the top row that my Aquaero is already plugged into has the 5th pin listed in the manual as 'NC', which I take to mean...

Sunday, October 4th 2015, 10:25pm

Author: Undesirable

Aquastream XT USB Motherboard Header Connection Question

Hi there! I have limited internal USB options available on my motherboard, and I need to be sure that I can plug my Aquastream XT into a 4-pin header which is available underneath where my Aquaero 6 is attached. Please see attachment image for clarification.

Monday, May 25th 2015, 3:06am

Author: Undesirable

Aquaero 6 Buzzer Changed Volume After Passive Heatsink Installation

Hi there, my buzzer changed volume after I installed Aqua Computer Passive Cooler for Aquaero 6. Previously, it was much louder, but after I installed the heatsink, the buzzer just makes a slight high-pitched whine (which can't be heard with earphones on and nothing playing) and it also makes a clicking noise at the same time.