Suchergebnisse
Suchergebnisse 1-17 von insgesamt 17.
Zitat von »InfoSeeker« I think the server was down, try again. Finally the software was downloaded, now everything is well .... thank you
hi, Windows 8.1 & clean install of it.. My system Time/Date is correct.. Firewall : OFF Is there any solution to this problem ? "Download failed, please try again later." Thanks...
I tried to connect it directly to the board, but the same problem!
I have two tubemeter USB and I connect it like this : *There Internal USB Expansion between the tubemeter and the motherboard.. http://www.amazon.com/gp/product/B0031ESKJA Often all the tubemeters do not work, and sometimes only one tubemeter working with aquasuite ! Is it one previously faced the same problem?? Thanks,
Zitat Originally Posted by Shoggy When you connect the relay parallel to the power button of your case you will not need the standby cable. You would only need it when you want to use the ATX break adapter and when USB (which normally powers your aquaero when the PC is turned off) is not connected. In this case you would not be able to turn on the PC anymore when it has been turned off by the relay because when it breaks the power, also the main power of the aquaero gets interrupted and the rel...
Zitat von »cpachris« what type of pins and connectors do you use for the relay switch on the aquaero? http://shop.aquacomputer.de/product_info.php?products_id=2665
Zitat von »Pilo« You can look into the Aquaero 5 manual chapter 4.12. Connector Relay. Pin 1: normally open Pin 2: normally connected Pin 3: common connector If you use Pin 1 and 3 you have an open connection witch will be closed when the relay triggers. Useful for operation as a power switch. If you have the pin 16 cable of the Aquaero ATX connector connected to the pins 2 and 3 of the relay the connection is closed as long the relay triggers. When the relay triggers it opens the connection be...
Thank U Pilo, About relay pin 1&2 or 3&1 if will be direct connection to the power button? http://hw-lab.com/aquaero-5-xt-review.html/7
So can not connect the two functions together.. Without connect the wires "Reset Switch" to the "Relay" Is the rest of the connections are correct? Rely Pin 1 & 3 > Power Switch Line out & Line in I will be connected wires directly to Mainboard pins (Relay>Switch>Mainboard) without the ATX break: 53047 .. And I want to use two switches because there are two holes switches in my case and I do not want to keep one of them is empty!
I have 2 switch on my case power and reset, but I'm not sure how I can connect the wires to the relay? so I can powering the PC up/down, standby and reset by aquaremote or emergency shutdown the PC? I'm already connecting the USB between Aquaeor and Motherboard..
Thank you for your advice.... I have done a simple design, which I want to do ..... Can I do that ?! >>>>>>>>>>>>>>>>>>>>>>>
Thank you for your help "Weihnachts-Shoggy" I will buy the cables, and I will use 2 Flow sensor..... And also I want to know how I can benefit the "poweramp" with aquaero controller : poweramp Verstärkerplatine für aquaero und aquastream XT http://shop.aquacomputer.de/product_info.php?products_id=2363 it allow to use more than a fan or pump with single channel in the aquaero controller !? >>>>>>>>>>>>>>>>>
Hello everyone, I want to buy this items : 1- aquaero 4.00 USB Fan-Controller, VF-Display with powerbooster http://shop.aquacomputer.de/product_info…roducts_id=2357 2- Flow sensor "high flow" G1/4 for aquaero, aquastream XT ultra and poweradjust http://shop.aquacomputer.de/product_info…roducts_id=2294 3- Temperature sensor inline G1/4 for aquaero, aquastream XT and aquaduct http://shop.aquacomputer.de/product_info…roducts_id=2291 But I want to know if it works with the pump well : Swiftech MCP65...