Suchergebnisse
Suchergebnisse 1-15 von insgesamt 15.
Zitat von »Grasshopper« ... you would not need a switching mechanism to access other profiles... A button/tab/radio button/check box.... in the interface???
I can load a profile as an action for an alarm, the problem is that I can't specify what's profile 1, 2....
Zitat von »Shoggy« At the moment that is not possible with the LT variant. Maybe this feature will be integrated to the aquasuite in the future. Right now you can only store and load a profile manually through aquasuite. Any new information regarding this matter? EDIT: Because what I need is to change the speed of my pump if the flow drops below a certain value
So I can't change profiles in Alarm Actions? Or is there any other way to set it? Zitat von »sebastian« Profiles not available for aquaero 5 lt. Is it planned to be possible to set it in the future? EDIT: Because what I need is to change the speed of my pump if the flow drops below a certain value
I already saved several profiles (to .pro file), but I don't know how to associate them with profile 1, 2.... so that I can use them as actions for the alarm settings. Can I specify profiles with Aquaero 5 LT, or not? If yes, how? Thanks in advance
Zitat von »LarryWill729« For your second item, in Aquasuite 2012, under the Aquero 5 tab, at the bottom is a tab for "System" Click on that, and you will find a button for Export profile and import profile. set up AS2012 for idle situations, and export it as Slow or some other name, the change AS2012 setting for games and export that profile as working hard or some other name. Then when you get ready to go to bed, import the slow profile, and when you want to work/play, import the fast profile....
Searched a little deeper into all the options of the Aquasuite and found a way to specify the PWM mode for fan 4, but the pump always works at full speed if I specify a percentage over 40% for the fan speed. Also changed the maximum RPM to 4500 but that didn't do a thing. I also found a bug in Aquasuite witch is after turning the PC on after hibernation, the flow sensor always shows the same value even if I change the pump speed. If I turn off Aquasuite and then back on again, everything works o...
Thanks, that's what I tough Zitat von »Phatboy69« You can only set alarms and shutdown functions from the front panel controls for the moment using the menu structure described above. Aquasuite 2012 software will have those features active in a a future release. Oops just read you have the LT... not sure if you can access the alarms and shutdown features yet since the software isnt available yet and you need the front panel buttons to access the menu. And what about the "inverted" pump control? ...
Just received an MCP35X and the 3 pin relay plug yesterday and mounted them both on the system. But now I've got to new questions: - Where can I find this? Zitat von »Shoggy« To get the shutdown fuction to work you have to adjust some alarm settings: Main menu -> Alarm -> Alarm and warning settings -> Alarm/Warning 4 (for example), change its name to Shutdown and as first action to be performed you select switch relay for 2 seconds. Go a few steps back to the main menu of Alarm and go into Tempe...
Can I connect a MCP35X directly to the aquaero 5 or do I need something else?
What other pumps can I connect directly to the aquastream?
Anyone? Edit: What can I do connect both of them, Shoggy?
I bought an Aquaero 5LT and I'm trying to integrate it with an "old" Aquastream (those with the separated controller, in my case one with the 1.31 firmware). So my question is: how can I connect both? Do I still need the separated controller or can I connect the Aquastream directly to the Aquaero? If so, how? I also bought this power control cable (article number 53047) so that I can shutdown the PC if the temperature is to high. But I can't find that option in Aquasuite 2012. Also, the cable ca...