If I plug the PWM pump in my motherboard, I can see the pump speed is 4500 rpm. But if I plug the pump in the PA2, as you can see in the screen 'PA2_FAN.jpg' in post 1, in aquasuite, I have 0 rpm. So even though I can't control the pump, I should be able to see the good speed in RPM, no ?

I don't have a Aquaero, juste one PowerAdjust Ultra connected with USB to my motherboard. I have 1 temp sensor and 1 flow sensor, both works fine. But for the pump, in fan section, The speed rpm is wrong (1500 rpm instead of 4400 rpm for MCP35X) before connect my pump in PA2, i connected a fan for a little test of my PA2. maybe the problem is here. I made a picture of the connection between my pump and PA2, the problem may be the connection... Thanks! [img]http://forum.aquacomputer.de/index.php?...

Hi, I have a PowerAdjust2 Ultra connected by USB to control my pump MCP35X. But in AquaSuite, i don't have a section for my pump, just one section for a fans controls. and with this section and I can't control a pump speed. My english is very poor so i toke some screen shoot sorry for my english Thanks [img]http://forum.aquacomputer.de/index.php?page=Attachment&attachmentID=3946&h=b1e5bc80f1c83e8a4918dd3da7c16784e934e02f[/img] [img]http://forum.aquacomputer.de/index.php?page=Attachment&attachmen...