Suchergebnisse
Suchergebnisse 1-22 von insgesamt 22.
thank you Jakusonfire thats all I was searching for. interesting the thing about the possibilty to convert to 400. could you please explain me more?
hi guys, as I said in the title I need some help to calibrate the mps 200 flow sensor. the preset can read just to 199 L/H. how can I calibrate it to read more not loosing accuracy? I also own a highflow flowsensor.
Thanky you for reply. I tried but nothing changes..
Zitat von »wa3pnt« Are you using a 4 wire Aquabus Cable? The 3 wire cable will not work without the USB connection, a the 3 wire does not supply power to the MPS. The 4 wire cable is an option. RodeoGeorge I know. I am using 3 pin cable + usb
The sensor works fine over usb but I'm trying to set up an MPS 200 sensor to work over aquabus when connected to an aquaero 5 pro. I connected both usb and aquabusI set the priority to aquabus 12 and power down. When I restart my system with the MPS connected to the aquabus high port, I cant find it anywhere under the aquaero 5 tab in aquasuite. When I go to sensors>flow. I see Flow 1 and Flow 2, neither of them have any readings. Even if i go in aquaero/system/currently connected aquabus device...
hi guys I bought 2 poweradjust 2 ultra to control my 2 laing d5. how could I do to connect them in the best way?? - using single usb connection for each poweradjust 2 ultra and using them with aquasuite or - connecting 1 poweradjust 2 ultra via usb and the other connected via aquabus to the first poweradjust 2 ultra??
this morning i tried plugging the aquaero to a laptop with windows 8.1 and everything is fine! plugged then installed as "aquaero 4.00". on my pc is installed as "aquahub" and not working dont know why it is not working on my pc, maybe the new motherboars asus maximus vi hero (I red of problems with asus mainboard..). so, for the moment I will configure the profile on the laptop and let it work stand alone on my pc. maybe I have to wait some new bios from asus I need an info : - how can i change...
Zitat von »sebastian« The device is not correctly registered (USB). Until the usb is not correctly initialized the aquasuite cannnot find the device. ok i know.. but how I have to proceed?? I tried all internal and esternal usb and same problem. are there specific driver that I can "force" to install ?
tried but nothing changes.. it is "generic hub usb" and the drivers are usb3uhb3.sys and asusfilter.sys ... are there specific driver?
still not working.. I can open aquasuite but no device showed. If I select "find usb device", nothing found. I windows aquaero was before "aquabus" but with driver problem and now is "generic usb hub"... please help me
Zitat von »Stephan« It is compatible. You just have to install .NET 3.5 - it includes NET 2.0 thank you stephan! I have installed net. 3.5 and aquasuite work! but aquaero not recongnized into aquasuite, even if it is still working "standalone" with my old setup on windows 7
hi! I have upgraded from windows 7 to windows 8.1 I am trying to install aquasuite 4.72 (i have an aquaero 4 usb) but when I get a message ".NET runtime library v 2.0 or newer is required. you have." I have the latest runtime library (I think 4..). where is the problem?? Windows 8.1 It is not compatibile with aquaero 4??
Zitat von »Grasshopper« great news, one question comes to mind , how old is your loop? december 2011
find out the problem. cpu waterblock was COMPLETELY obstructed. I cleaned it and now i have a flow around 180 l/h. <img src=" But poweradjust 2 ultra is bricked and need rma.
flow meter cable doesnt work and if i touch it to disconnect, PA2 turn off and restart.. very strange. now as I wrote in the post PA2 is stucked to firmware 0 and I'm not able to update it. I tried removing aquasuite 2013 and reinstall (new installation) but not able to update firmware 0006. Tried to remove power and wait (also this morning I tried after leaving all night turned off) but nothing changed. I also installed aquasuite 4 that got firmware 1003 in the folder, but same thing. It says u...
today I tried a loop with only pump, flow meter and reservoir. the flow looks great so It is impossibile pump got problem. The flowmeter still not work. Now it is on 0, like there is no signal. Strange thing if I plug the flowmeter cable the poweradjust 2 restart, like there is a contact. and now the poweradjust 2 not work, red link blinking! It is now recognized as poweradust 2 advanced not Ultra and there is firmware 0! I already had updated to firmwre 1006 but now it is 0. I tried to update, ...
I have got Ek supreme hf on cpu and Ek supreme hf vga bridge edition on gpu. radiators are xspc rx 360 and ek xt 240. I have not restrictive components.. Next week I will test pump and reservoir with the flowmeter and i will see if the flowmeter changes value. I'm thinking.. Im not using the original flow meter cable by aquacomputer but the phobya one, it could be a problem??
ok.. i have to test it with a custom loop, then I can say if my loops got problems or if it is the flowmeter. one thing, on the flowmeter it is written "min 40 l/h", so it is normal that it reads 10 or 15 l/h?
I bought both (pa2 ultra and flowmeter) from a friend, and they were working good. the difference is my friend used the flow meter with the aquaero non with the pa2. I do not have problems with temps but it is too low flow I think (yesterday I changed the verse of the flowmeter and now flow is 15 l/h !!) I will test with other loop I have now discovered that I had mounted vga waterblock with inlet and outlet reversed, and this is not good for the flow I think.
hi all I'm having some issues with the Poweradjust 2 ultra usb and the flow sensor aquacomputer. the controller works well with temp sensor and with the pump (laing dcc 3,25 18w) showing correct values. After I purchased and installed the aquacomputer highflow sensor but it shows me only 36 l/h with pump at 12v (5000rpm) and if I give low tension it shows even 10-15 l/h. I set the impulse at 169 (there is also pre set flowsensor).. tried 158 but nothing changes.. I also opened the flowsensor but...
25.04.2024, 19:32
Sprache ändern
Registrieren
Anmelden
