Suchergebnisse
Suchergebnisse 1-35 von insgesamt 35.
How do you disable the profiles tray icon?
Found this... http://www.xtremesystems.org/forums/show…l=1#post4830170 and this: Well, that's it then!
Hello, I know it's kind of a stupid question, but does it matter if you invert in and out on this filter? https://shop.aquacomputer.de/product_inf…roducts_id=2421 I just noticed I had it the other way around until now, after disassembling the build.
Zitat von »sebastian« you have to do this after a firmware update or wiring modification. Thx it works now! Very happy, nice update you did guys!
Aquaero says 2011 and mps 1011. No I didn't do that.
Yap it is on aquabus highspeed via 4 pin cable.
Yes that's what I thought as well about not being same number but anyway, on aquabus device list is empty.
In aquasuite flow is OK, but on aquaero on flow information page it shows 0 l/h
Yes it crossed my mind, thought you might give some compare info, at least approximately, flow D5 at 2000rpm vs AU at 3000rpm I'm using one of yours D5's
I see, I'm asking because I'm running my D5 PWM(with aquaero) on only 10% which according to aquaero spins the pump at 2100rpm, giving my loop about 96,5 l/h. I can do more actually at 50% it's about those 3000rpm, but after that at higher speeds it gives me bubbles on the bay res. This pump is interesting because I could remove the flow meter and even a temp sensor since the pump already has both of them inside, and judging by a review I watched yesterday noise level is pretty much the same as ...
Hello again forum, it's been some time... That new Aquastream Ultimate pump seems really awesome but is it true the minimum speed that can be set is 3000 rpm? Thx
Roger that. Thx Everything is running fine now in my testing and tomorrow I plan to connect the D5 PWMs to the aquaero, I left 2 fan channels for the pump wires to come in. Right now I have only one pump connected to its power supply so I only have to connect the cable with PWM and RPM, I'm wondering if to set the output value first and then connect the pump live or do I have to shut down before connecting it I mean if it does even matter? EDIT: All done
Yes only one MPS device installed, and I even changed the address still working fine. But do I have to calibrate it? isn't the default value of 169 imp/l pretty correct? I'm using standard 10mm inner diameter tubing
LOL never mind about that last question, that in the screenshot IS the actual flow ! And I didnt even need the USB to be connected, now when I remove the USB connection it still receives the flow, through the aquabus cable of course. I mean I understand you would need to connect the USB at least to set it up correctly in aquasuite, just like you do with the farbwerk bluetooth when you have to connect it to USB for the first time to set external output and after that you can disconnect USB, but w...
Hmm things seem to be like before So everything is set fine: And this is exactly the same as it was before I hooked up the USB cable Do I need to play with the aquabus address?
Thank you Jakus, gonna try that right away!
Hello guys! It may be a stupid question but I have to ask..on the high flow usb flow meter - do you have to connect the usb as well to a usb header on the mobo or just the 4 pin with an aquabus cable to let's say "high" input on the aquaero? With the latter it doesnt recognize anything, although I havent installed windows yet so I haven't played with the aquasuite...
You know, I think you're right, I might order this one and then return mine anyway, so I will get this one as soon as possible, so I dont have to wait for them to get mine and send it back to me. I shoulda have bought that seonsor in the first place, but due to my not enough research at the time and naively thinking that the USB high flow version is ''better'' just because it costs more I went for the latter. The only ''problem'' is that this one needs at least 5cm of straight tubing before and ...
Hey bcikota, well I tried what they told me today from support, and yes one of the things was to turn it, but in any direction didnt help :/ I guess I'll have to return it, totally dissapointed, spent so much money and time on this and now will have to wait, not to mention that today was my BD so after I came home from work I spent time with this without solving anything, ooh maan Thx for replying, I hope they will try it before they send me the next one
Are you sure that's the display coming out? Isn't that just the invisible plastic cover in front of the display? I had the same 'problem' and just had to put glue behind it. But yes I have to admit I'm also kind of disappointed, my EMI filter on the aquaero PCB was maybe 1mm too high, and if I had put too much pressure on the screws when attaching the passive cooler I would have damaged it, in fact I did a little so I had to bend the component, and to make sure it wouldnt get damaged I even cut ...
Sorry I'm bumping this old thread but didnt want to open a new one just to say that unfortunately I have this same problem. If someone wants to hear it, I'm putting this link to download, there are 2 videos inside, one is with one D5 and the other is when two D5's are turned on, they are on MOLEX only so I guess they run at 50%, imagine running 2 of them at higher speeds... http://www.mediafire.com/download/oi8nm8…ensor+sound.rar I sent an email so probably tomorrow we'll see what they say. Wha...
Wow some nice stuff there thx, I will take a look and read everything and try to absorb some knowledge and good advices from experienced people like you as I'm totally new to aquaero. I will definitely post the new build, it will be something special, if you want to just take a look at my current build(don't mind the language lol, just look at the pictures..you know just like when you watch a porno mag), which is nothing special but the interesting fact is that the case is made by acrylic, the c...
Yeah I will be ordering a lot of stuff from percormance pc's soon so 1 or 2 more cables won't be a problem, I will go bankrupt anyway with my new build Thx Nam
You're right, it's the high flow port on the aquaero I found this on overclock.net, someone wrote : Zitat red is the 3-Pin flowmeter header for the non-usb flometer. You connect the USB/Aquabus flowmeter to the High-Speed Aquabus Header circled green. You can't connect from Aquabus => Fan Header!!! The reason that the flowmeter you bought costs more is because of the Aquabus/USB function. The cheaper one only has a 3Pin output which can be connected to the flow header or the first fan header. Th...
Hey Nam, thx for replying. Yes, I have the one that came with the cables already. So yeah I don't have to connect him with the mobo, since that 5pin connector will be already taken by the one form the Aquaero, I mean the flow meter only has to send the signal reading to the Aquaero and that's it I think. Like I said, you connect the usb connection only if you don't have an aquaero I guess. Or I got it wrong? On the aquaero you have 4 pins for "high" connector but the cable has 3 pins, so I actua...
It's this one http://shop.aquacomputer.de/product_info.php?products_id=2897
Hey guys, Hello again! Some time ago I bought the pumps(aquacomputer) and the aquaero 6. Now I bought EKWB's dual D5 top, I still have some things to buy but I would like to discuss the connections. So I can connect both the pumps into one PWM output with a pwm splitter or connect them to pwms separately? Which is better? Same for the fans(4 of them)? Also got a flow sensor(aquacomputer), it comes with a usb 5 pin cable and a 3 pin cable. So with the 3 pin you connect it to aquaero's far right c...
Zitat von »Jakusonfire« The EK dual top is the best one available so great choice there. The best? I have to admit I didn't read any reviews about D5 dual tops. I'm still debating whether to buy that or the one from Bitspower Now that you say that I might choose what I first wanted, heh.
I think in the end I might buy 2 of these http://shop.aquacomputer.de/product_info…roducts_id=3255 and use a top for them http://www.ekwb.com/shop/pumps-and-acces…ack-acetal.html I was thinking about EKWB all in one becasue it comes all connected and ready to go, but this way I won't have to mod the pullup resistor problem, I mena it's no hassle but still...
Wow thx Jakus, very interesting and useful
Hey Boris thx again, very kind Well if I will have to make that mod it's no problem, as long as it works fine in the end Thank you for that mod link, it's so well explained and clear. Regards Mauro
Hey Boris thx a lot for replying. Yes I had a good read about that problem some time ago maybe even on this forum, don't remember exactly, but I think it was related to a specific brand of D5 and to that one only, so I hope it will be fine with those I linked. I have a question about those pumps when you fill your loop, you know how it is, you put some liquid, you turn the pump/s on, it enters the system, you turn them off, and all over again. Well..the moment I turn them on they will be running...
Hello, I'm planning to buy an Aquaero 6 for my future build soon and I just have a couple of questions, I hope someone can clear it out for me. I plan to use 2 PWM D5 pumps http://www.ekwb.com/shop/pumps-and-acces…cl-2x-pump.html and 6 fans (4 on radiator and 2 for case). So if I understand correctly, there are 2 PWM outputs on the Aquaero, can I use one for the fans and the other for the pumps? Achieving it with Y-splitter cables? http://cdn.overclock.net/2/2c/2c625b93_fanconnection.jpeg Sorry ...
19.04.2024, 19:28
Sprache ändern
Registrieren
Anmelden
