Suchergebnisse
Suchergebnisse 1-36 von insgesamt 36.
The device is really old, bought in 2015. However, it has been working together with the heat sink from the very beginning. I could take it to a local computer service to keep the costs from being astronomically high, as shipping alone would be outrageously expensive. Maybe I'll find out which circuit is responsible for these two channels (probably one for 1-2 and the other for 3-4). If the service could tell me where to look, I would be satisfied, and they would too, as they would still have a ...
I connected the previous fans - disconnected all others. Channel 3 is dead when it comes to RPM - it occasionally shows something but mostly it's 0. I can adjust the speeds by setting them to 0%, but the RPM value is not displayed. What to do now? //edit Channel 4 behaves the same way. What could have happened here?
So, I tested the regulation from 0 to 100%. The speeds change, and I see how the fans work, but the information about the speed at which they spin is not displayed. It shows the screen above: Power 22% - just like for Socket 1 and 2, but instead of ~350 RPM, it shows 0. These fans are connected to each other - there is no wire there. But the fans are connected to the aquaero/motherboard with a cable - I also changed this cable. To clarify what I did... - changed the order in the "chain". Fan 1 b...
If I may interject. I also thought it doesn't fit. I mean, how hard I tried, and nothing. But that wasn't true. I had to use a really significant force to get the tube into the hole. Even the person commenting on that suggested to me - I didn't use enough force. That was true. To fit into the second hole, I had to use even more force. https://forum.aquacomputer.de/weitere-fo…ir-tube-problem
Hi I have an issue with the new fan configuration connected to Aquaero 6 PRO. The previous configuration - 4 channels with 4 fans each (NF-F12 PWM) worked perfectly - there were 16 fans in total on radiators. Now I have Lian Li UNI FAN P28 - 3 fans on each of the 3 channels (1 is free) - a total of 9 fans. The problem is that aquasuite (and aquaero) do not correctly detect the RPM on the 3 channels (also the 4th, as it turned out later) - most of the time, I get 0 rpm, sometimes it increases to ...
I have a problem with Multiport. The tube I put in the cap has no thread - it is pushed in "by force". It does not hold well. After a few days the tube fell out by itself. This is how it looks now. Is it supposed to be like this, that it does not screw in, sits poorly, or should I return it? Please help me how should I install this correctly?
LEAKSHIELD leak prevention system standalone is compatible with Multiport lid for ULTITUBE 200 reservoir ?
During the update, the program doesn't know where the program is installed. I have aquasuite installed to another folder. Is it possible to improve/fix Destination Folder?
Hi Is there a way to integrate this tube with ULTITOP DUAL D5 pump cover for two D5 pumps, G1/4 -> https://shop.aquacomputer.de/product_inf…roducts_id=3945 I already have one D5 pump + bought a set ULTITUBE D5 200 PRO reservoir with D5 NEXT pump. Want to expand the system for another 2 radiators, but now the flow on 55% for D5 is 105 lph. Don't have a place to divide the loop on the processor and graphic. That's why I need to connect everything into the same water system. Hmmm or serial connecti...
Zitat von »Hufeisen« Zitat von »Marucins« that there is one input that works or as aquabus or as RGBpx LED. RGBpx requires an USB connection, it is not possible to control RGBpx with Aquabus. This applies to all RGBpx devices. https://youtu.be/ya-8E7Hzj3s?t=12 In this video there is one input which is either RGBpx or aquabus. That's how I understand it. If I connect RGBpx ring to the D5 pump, will I have full flow control when I connect the pump via USB to my computer? Hmmm... I wonder if each ...
Hello What I intend to do: 1. Replace the pump D5 Pump Motor with USB and Aquabus Interface (41093). 2. Add a phenomenal AMBIENTpx effect to the monitor (AG353UCG). https://youtu.be/XNnAkMD9L1I?t=11 I have Aquaero 6 PRO. I care about maintaining full control over devices and lighting (Aquaero / Aquasuite X) Ad 1. I'll buy it ULTITUBE D5 200 PRO reservoir with D5 NEXT pump https://shop.aquacomputer.de/product_inf…853&language=en I want to connect it to Aquaero Do I need an extra cable? Something ...
I understand. So how many farbwerk nano devices can I connect when powered by SATA, assuming that each of them has 3 LED strips? Will I be able to connect 2 nano devices? In total, it will be 6 LED strips or 1 nano farbwerk (external) + 6 LED strips can he handle it?
How to set the program so that Virtual Software Sensors automatically counts% of a given number? e.g. 25 is 1% and 480 is 100% What is the function? //I created something like this.
Interesting but that's not it. Besides, HUBBY7 gives me more internal USB. I will definitely use an external power source. I don't like MOLEX plugs, I want to get rid of them. And NANO gives you such an opportunity. It is a pity that the Farbwerk 360 does not have a newer version with a SATA plug. 1. So if I have a NANO controller + HUBBY7 (SATA power), how many LED strips (how many diodes will there be - 90? les?) will I be able to connect? 2. If these 90 diodes are spread over 2 or 4 NANO, it ...
Hi I want to illuminate the case a bit... This hub caught my eye -> HUBBY7 internal USB 2.0 Hub And these are the sets... farbwerk nano (internal) of course, additionally, LED strips. 1. How much LED strips can I connect under ONE farbwerk nano? a) 30 addressable LEDs b) 15 addressable LEDs 2. How much farbwerk nano can I connect under HUBBY7 internal USB 2.0 Hub? Thank you for your answer.
Hi I cannot find a new version of the program. It shows that X31 is the latest version. Additionally, I would like to know if I can update the FW for the D5 pump?
I made factory defaults for MPS, it didn't help. I have transferred LC to a new computer. Earlier I had aquasuite X but an older version. There was an inscription about updating the PUMP - I did it, I later updated Aquaero. I have restarted my computer to install drivers and software. When the time came for Aquaero settings, the pump was no longer there. What I should do now?
I turned off the computer, disconnected the cable. I checked if the cables are pinned Aquabus -> High. I restarted the computer. Still the same. Cannot see the D5 pump. And what should I do now? Aquaero bought a long time ago in 04-2015 (Aquacomputer aquaero 6 PRO). What broke D5 or Aqubus in Aquaero? What to do now? Guarantee works? Repair? Can it connect to Aquabus Low? Isn't that what it is for...
Hi After updating the software to the latest version of aquasuite X.11 (20-DEC-2019) and upgrade FW for D5 (41093) to version 1012, Aquasuite stopped showing D5 in the Aquaero tab
/sorry for unearthing the topic, but it was the latest on the subject. I have to buy a filter. Of course, the choice fell on https://shop.aquacomputer.de/product_inf…roducts_id=2421 - What is the default filter mounting plate? - In what position should the filter be installed (horizontally / vertically) so as not to drain the water when cleaning? I wonder where I can mount the filter - what patents do you know? On the fan, next to the fan, some special mounting frame, etc. //edit I was thinking ...
In my case, the sound is identical. With or without heat sink.
After connecting the USB cable the showed mps panel... Now actually heard that pump slows down. 1. The question to which turnover set the pump - what to give a maximum flow (l/h) and what minimum flow (l/h)? 2 I've heard that people buy pwm pumps 1-5 and set the switch to the 2-3 and already leave forever. In our case it will be 35-50%? And what of the fans? 1. What can be the minimum liquid temperature and what the maximum? I want to set halfpassive mode.
Zitat von »EnigmaG« If you using such a splitter, you only can use PWM controlled in "aquaero -> Fans" and only with PWM-Fans In "aquaero -> Controllers" you then can set whichever control you prefer It worked... Going back to curves. My set. I do not know if there is well? I have 3 sensors - The first CPU (Koolance 380I cooler) - The second reservoir (internal/external thread G1/4) - The third is to measure the air (outside case) I wants to set the most efficient and silent configuration. With...
Zitat von »EnigmaG« Temperature range from 20° to 50° (<20°= 100%B 35°=100%G >50°=100%R) Color 1 G 100% B 0% R 0% Color 2 G 0% B 0%R 100% click on the color arrow to switch from b-pink-r to b-g-r Yes I did. I wanted to have one color for specific temperatures. Zitat von »InfoSeeker« I think you want to use the Manual setup on the Curve Controller... then you can set each point individually. [attach]5285[/attach] I do not know how to properly set the minimum temperature, maximum. I've never had ...
That's how I've done. But I prefer to do interval separately. shade of blue 20-29 the shade of green 30-39 and red odzień 40-50 Looking at the picture tell me what this could be the temperature? Completely not readable //OT InfoSeeker, I understand that you are using temperature sensor (e.g http://shop.aquacomputer.de/product_info…roducts_id=2293) How do you set water temp intervals - for the fans and for the pump?
Another mistake is a steady light despite guidelines. if temp 20-29 -> BLUE - 100% if temp 30-39 -> RED - 100% And now I have red and blue on 100%
I found error - Aquasuite 2015 - 6. It is impossible to add 3 functions to the Controllers for RGB illumination module for aquaero 5 and 6 -> http://shop.aquacomputer.de/product_info…roducts_id=2664 First, you can add and adjust as you want the same thing from another, but adding a third will copy all the functions of 2 (name, temp range, color etc)
I get tired of a few hours and do not know how to set the fan speed and Pompu for curves. I have 4 fans combined into 1 input - multiple of 4 (a total of 16 fans) I am using such splitter: http://gelidsolutions.com/products/index…=2&cid=11&id=63 At the beginning, how to configure the fans? aquaero -> Fans - power controled - speed controlled - PWM controlled If I might add to aquaero -> Controllers -> Curve controller -> Outputs FANS Tab aquaero -> fans all settings change (voltage 0, power 0, e...
I need to peel off the label from the pictures before the imposition of cooling? http://s22.postimg.org/v8s2zcwi9/image.jpg Or installed heat sink as it is, without peel-off stickers with tags?
OK I have this cable. I wanted to make sure that connected to the FLOW or Aquabus
I have a sensor http://shop.aquacomputer.de/product_info…roducts_id=2294 connect it under the aquaero - FLOW socket?
Zitat von »InfoSeeker« From your post I will assume you have the Aqua Computer D5 pump motor with USB and aquabus interface If so, you can use the 3 pin aquabus cablle included with the pump. The aquabus connectors on the D5 & aquaero are 4 pin, but only 3 pins are used. use the aquabus plug on the D5 and the aquabus high on the aquaero [attach]5250[/attach] [attach]5251[/attach] EDIT: did you get a satisfactory resolution to your reservoir top and clamp needs? You're right I have exactly this ...
Thanks You're right. It does not fit. I used: http://www.aquatuning.de/wasserkuehlung/…200mm-dxh?c=298 + http://www.aquatuning.de/wasserkuehlung/…usch-deckel-pom + http://www.aquatuning.de/wasserkuehlung/…enroehrchen-v10 + (But this I do not use - up close it looks disgusting) http://www.aquatuning.de/wasserkuehlung/…ck-60mm-schwarz
I bought Aquaero 6 Pro and D5 pump. I Includes USB cable and 3 pin. 1. How do I connect the pump to the aquaero to fully control it? 2. Do I need to buy a 4 pin cable Aquabus?
Hi I have a top for pump D5 - Koolance PMP-450/S, Rev.2.1 http://koolance.com/pump-nozzle-and-rese…pmp-450-60mm-od I'm going to buy the tube - 60x200mm or 80x200mm http://koolance.com/reservoir-body-60-x-200mm-393ml http://koolance.com/reservoir-body-80-x-200mm-770ml I want to mount the tube on top of the pump. I need a clamp and cap at the Top of at least two holes. I'm thinking of such a thing: http://shop.aquacomputer.de/product_info…roducts_id=2918 + http://shop.aquacomputer.de/product_info…...
20.04.2024, 13:52
Sprache ändern
Registrieren
Anmelden
