Little up since now pro must be back from holiday I change the tube for some 10/16mm and now I have 70l/h

" the Aquaduct product comes preconfigured correctly as the pump and flow meter are hard-wired without options." I think so too. in the option there is a "aquaduct mark V configuration" preset.

Hi, I try running with on block, same flow, with no block flow reach 56l/h "Not sure how it goes with aquaduct, but is your flow sensor configured properly, by this I mean the impulse/liter value?" =) How you do that?

I don't know the temp of GPU or GPU. It's my first WC so I want to be sure, so the component are still outside the PC since I'm sure the flow is allright and it's safe to put them again in the computer.

The 100% pump is intended. If the pump isn't à 100% the flow alarm ring cause the flow drop to less than 30l/h The system is: Aquaduct 720xt =) 5/8mmtube (the one with the aquaduct) =) 8/6 g1/4 adaptater =) gpu waterblock ekwb 290x =) 8/6 g1/4 adaptater =) tube =) 8/6 g1/4 adaptater =) cpu waterblock ek supremacy evo =) 8/6 g1/4 adaptater =) aquaduct 720xt There's no debrit / dirt in my opinion. I think of that so I already empty it and refill it to check that. There's no 90°fitting. Thanks a lo...

Thx for the answer, here the screen of the pump and the flow [attach=5531][attach] [attach=5532][attach]flow[/attach][/attach][/attach][/attach]

Hi everyone, Firstable, I apologize for my english because it's not my original language. I have several problem with my 720xt. First one and most important in my opinion is the flow. With two waterblock the flow is only 48l/h but to have that the pump is at 100%. Is that normal? Tanks for reply I ll give every information needed. Happy new year.