Suchergebnisse
Suchergebnisse 1-9 von insgesamt 9.
Bumping this as it now became a real issue. As i upgraded from w10 from w11 i still had the pumps in aquasuite though i had this usb port reset failed issue. But now i had to reinstall my system (so w11 from the get go) and i cannot install aquasuite as it doesn't detect any usb devices. Could i get any help please?
Hello, since i upgraded to windows 11 my d5 next appears at "unknown USB device (Port Reset Failed)" in windows device manager. Is there a way to fix that?
That's weird, would've thought the fans would just stop spinning. Thanks for the clarification
Hello, i updated from a very old version of aquasuite in order to plug-in my d5 next. The issue i have is with anything other than preset for the fan control. Basically it says controller output 0% and fan output 0% but my fans are running at 2200rpm (i can see the rotation speed on the top graph) In the fan setup below i think things are properly configured ? Here is an image of the configuration for the aquastream ultimate https://imgur.com/a/tVgUizD What am i missing? It seems to be working p...
Oh makes more sense now thanks. Well the thing is, even if i plugged an ambient sensor directly into the motherboard i don't know any software that could make a delta with the temps. Aquasuite seems to require an aquaero to be plugged for this (most likely embedded proprieaty software in the aquaero) so ... :/
Zitat von »InfoSeeker« I would not use the aquabus connection between the pumps and the aquaero, keep them all on USB. This may require you use a HUBBY7 internal USB 2.0 Hub if your motherboard has insufficient internal USB 2.0 ports. The only other option I would suggest is a Flow sensor high flow G1/4 in each loop. I have not used the D5 NEXT pumps, but I have seen several posts regarding the virtual flow sensor's limitations and complexity with calibration. If you do get the High Flow sensor...
Hello, been looking at the forum for the configuration of my loop. Basically i intend to separate my cpu and my gpu with one 480mm radiator for each (so four fans on each loop, 4 fans = one splitter), one d5 next pump per loop, one external temp sensor and everything connected to the aquaero 6 lt. I intend to use the internal temp sensor of the pumps and the virtual flow meter. The pumps will most likely be set at 60-70% (whathever is silent) and forget about it. I intend to run the fans with a ...
I don 't want to combine the sensors with the aquastream. I want to combine them in aquasuite. Maybe the term "virtual temperature sensor" was misleading, i just used it (with a maybe) to create a point of refence of what i want to do
Hello (i apologize for speaking english but it's either that or french, the only thing in deutsche i can say is deutsche ist so schwer ) So i am about to finish my custom loop (first open loop weee) and the last part is a pump/reservoir. I currently can't decide between the d5 and the aquastream ultimate so i would need a few answers if possible. Regarding aquasuite, i want to know if it is possible to combine several temperature sensors (mainly one in the loop for coolant temperature and one in...