Suchergebnisse
Suchergebnisse 1-16 von insgesamt 16.
Zitat von »OddsCrazyStuff« "Molex connector officially handles 11A = 132W" 132/24=5,5W So internal GIGANT's power cable can push 132W, is that confirmed officially by Aquacomputer? Can't find official answer on it, good to know also how much Y-molex splitters we can use? I guess until we reach 132W
I don't think what you can apply liquid metal for these M.2 water blocks
Isn't it pointless to do then - adding nickel over copper since copper has better heat sink?
https://shop.aquacomputer.de/product_inf…roducts_id=3401 <- which plated this one? https://shop.aquacomputer.de/product_inf…roducts_id=3408 (nickel plated water block) I didn't find information about https://shop.aquacomputer.de/product_inf…roducts_id=3401 , seems it's copper by images but I wonder why it's cheaper than nickel then? I though copper has better heat sink than nickel or?
I didn't care about that too much and just took from their shop reservoir with installed fill sensor, this sensor (as Sven told me) is same with sensor installed in their aqualias reservoirs
G1/4 fittings depends on your tube size i.e. for example 10/13mm. Most water cooling systems use 1/4 either 1/8 again depends what you use. This sensor has supported adapters x2 M3 (distance then 12 mm between HIGH and LOW) or x2 M5 (distance then 24mm). So you will need to buy these adapters to G1/4 or G1/8 fittings which you use in your loop if I am correct
I had same question, got answer here Is it correct MPS Pressure connection scheme ? G1/4 fittings can be used
Good to know what "Low" must be open as fill level for my scheme. I totally understand work mechanism now So I guess I need to buy some Manometer in case to track somewhere in visible area pressure during normal operation..
I attached picture as connection scheme on vertical 140 mm radiator, is it correct regarding documentation https://www.manualslib.com/manual/123976…l?page=8#manual ? Also how to understand which MPS's to use for fill level and pressure sensor? There are 40,100,500,1000 of "Pressure sensor mps pressure Delta", my radiator approved for 0.8 bar pressure with very large water circle so I think MPS Delta 1000 as pressure sensor and my reservoir 150 ml with 170 mm of height so for fill level it's MPS ...
InfoSeeker, I saw your thread on forum, with your way you don't have enough space to install side 140mm fans which I prefer to have. What 140 mm mounting you used? Can't find it on EK
Zitat von »Hufeisen« 2.1 Of course you can split Molex cable. There are Adapters from Molex to SATA, too. http://prntscr.com/r0ezxt So regarding this I will need adapter for Molex male to x2 female (https://shop.aquacomputer.de/product_inf…roducts_id=1779) + 2 female sata
I am a bit new to all this but really want to care on everything before will buy and fail with lack of knowledge of what I will do D5 / GIGANT related questions: 1. Does x2 D5 NEXT compatible with EK-XTOP Revo Dual D5 Serial (https://www.ekwb.com/shop/ek-xtop-revo-dual-d5-pwm-serial) ? 1.1. If yes, can EK-XTOP Revo Dual D5 Serial be mounted to stainless steel interconnecting plate (https://shop.aquacomputer.de/product_inf…roducts_id=2969)? Description page of aquacomputer has missing information...
I wonder where is this sensor in shop, does it exist or how does it work on "all in one" aquaduct? What do we need to have it on aquaero 6 also?
Some one can recommend pump motor to pump liquid for single circle through water blocks on: RAM, CPU+Motherboard, M.2 SSD x2, GPU x2 connected through terminal, 1.5 meters of tubing IN and OUR between GIGANT and PC case? I thinking about dual D5 pump connected inside GIGANT through special mounting but still not sure if it will enough power, I saw another user on GIGANT used 3 pumps for it in serials, so I am really confused which power motor need.
I think your dual-D5 is much powerful than Eheim 1260, 3500L/h vs 2400L/h (seems description on aquacomputer is a bit wrong since there are noted 1200L/h or they have it lower because of ceramic bearing). I am not sure what dual-D5 either Eheim 1260 can pump all this circuit
I seriously thought about building a computer with this external radiator https://shop.aquacomputer.de/product_inf…roducts_id=3373. At the moment I have found the only seller of this device, but I'm afraid to buy because of the experience with the AquaDuct Mark V. At the moment I have the AquaDuct Mark V and it has a very, very weak pump for the water circuit from the video card and processor. I had to do dances with a tambourine in order to tilt the AquaDuct in different ways and help the fluid...
20.04.2024, 00:20
Sprache ändern
Registrieren
Anmelden
