So as I see, the Splitty 12 ACTIVE has also 4 Corsair sockets, which means I could basically replace one of the two splitty4 by a splitty 12 (only for leds not for Pwm)? As I have 6 rgb components, do you think I can use two two ways splitter cables ? <img src="https://www.docmicro.com/images/products/tag/EK-LoopD-RGB2-WaySplitterCable.jpg" alt="EK-LoopD-RGB2-WaySplitterCable.jpg" title="EK-LoopD-RGB2-WaySplitterCable.jpg" style="font-size: 0.81em;" />

Hello there, Thanks for your help Remayz. I followed your advice and made some tests. First, I plugged the pump, directly on Octo's RGBpx2 port (so distroplate, flow meter and CPU/GPU were not plugged). I did put a static color (red) to see if it worked properly. No flickering at all. The only weird thing I noticed, is that my fans (6 x LL120 on 2 chained splitty4, plugged on OCTO's RGBpx1 port) sometimes simultaneously make a White flash (maybe about every 1 or 2 minutes). Then, I unplugged the...

Thank you Speedy ! I've finaly received my RGBpx cable (1015487) and adapter (1019287) so I could plug the rest of the RGB components. I plugged the RGB hub (5V 3pins, see picture in my first post) to the RGBpx 2 port in the OCTO, and off course to Sata power plug. On the Hub, I plugged : - Barrow CPU WB (LTYK something) with barrow cable adapter - Bykski GPU (N-RTX3090FE-TC) : front and backplate - Barrow flow meter (SLFV1 RGB) with barrow cable adapter - Distroplate Barrow LO11-SDB V1 with bar...

I finaly played with the potnetiometer. When I built my loop, I did put the potentiometer on its maximum setting. I did put it to the minimum level, and found out that I could manage the PWM through Aquasuite now

Hi Speedy, Thanks for your answer. I use this pump (SPB17T PLUS) because I have a Barrow Distroplate (LLO11-SDB-V1), and it is the recommended pump by Barrow. It is directly attached to the distroplate with 4 screws and I don't think there's any top that would allow me to attach a D5 to the distroplate. This is my first ever custom loop so my choices are not as enlightened as yours may be Indeed, the pump has a little potentiometer but I though I would be able to control it through Aquasuite wit...

Thank you so much for your answer, I'll get to plug the cables tomorrow (it's 3h30 am right now). I forgot to ask but, I plugged the pump PWM on the 1st PWM Fan output of the Octo, and it turns out that when I play with the ouput power slider, the speed (about 4500rpm) doesn't change. Did I get something wrong again ?

Hi, I have just finished my watercooling build (well ther's still a few things to fix) and the way I though I woud be able to connect everything seems to not be working so I am wondering what would be the proper way to connect all the components. I'm totally new to Aquacomputer products and need your (greatly appreciated) help. Here is a drawing of how I have connected my 6 LL120 fans, and WC pump (Barrow on a distroplate) to the Octo and Splitties4 (I forgot on the drawing to draw the power of ...