Suchergebnisse
Suchergebnisse 1-6 von insgesamt 6.
Also, can I run the usb 2.0 splitter from a distance. I want to have a XLR cable handle power and usb, and split the usb 2.0 off at the end, so I don't need to have long pwm cables coming from the D5 Next, high flow, and octo.
So this : https://www.amazon.com/Rocketek-Motherbo…ps%2C115&sr=8-7 Would be sufficient ? Or should I buy a NZXT/Hubby 7. I just don't want to deal with returns and stuff.
Can I use an internal usb 2.0 hub that gets power directly from the usb 2.0 header such as this: https://www.amazon.com/Rocketek-Motherbo…ps%2C115&sr=8-7 Or do I need a powered hub?
What about a cheaper one like this: https://www.amazon.com/Rocketek-Motherbo…79796284&sr=8-1 This one does not require a SATA cable, and gets power straight thru the USB 2.0 header. Is this gonna be an issue ?
Gotcha. Thank you everyone for your advice. I guess I will have to splurge on a USB 2.0 Hub.
Hello everyone, I hope this question has not already been addressed. I have attempted to look for an answer, but not very thoroughly. I have an Asus B650E-I motherboard, which only has one US 2.0 header, and therefore only room for 2 USB connectors. My setup is a Mo-Ra3 420 with 4 noctua fans connected via an X-splitter. I am trying to figure out the best way to wire a D5 Next pump, a second D5 (Non Next) pump, the high flow Next, and an Octo, but as previously stated I only have room for 2 of t...