Zitat von »Speedy-VI« Why do you have pump speed (and flow rate) tied to CPU temps? yeah late necro post, never saw reply.. still ironing out bugs in this loop still though. CPU temps thing was a typo I think. Turns out I was using 10mm female couplings and a male fitting on one side was slightly over 5mm threads so even tight it wasn't sealing 100%. It is better now with longer couplings, but not perfect. I'm losing up to 0.2-0.4mbar/min @ 200mbar, however fluid level in res isn't rising like ...

I guess I'll reply to myself then ... for those interested, the fill measurement seems to be wonky and highly inaccurate, but that may not be related. Fill feature is useless, but easy work around is to just use a low pressure test instead of fill feature and siphon coolant in short bursts. What is certainly related is if you have a leak AND your pump speed is too low to flush out bubbles leaking into the loop AND you loop is somewhat complicated (like mine) then the air trapped on your GPU bloc...

I've had the Leakshield about a month and I was draining and refilling the loop to make some changes. The leakshield threw an error for about a day saying the vacuum pump was't running and indeed it wasn't and it was dead silent. a day later it weakly started working again. It now seems to be working normally, but I'm now afraid of premature failure down the road. The case was turned on it's side with power off while res was 80% empty. I'm thinking either 1) something is plain defective 2) the m...

I just assembled a pc with the Quadro, D50 110ml res, and Leakshield. I realize the D50 isn't supported but nothing else would fit in this SFF PC. What are the likely failure modes? leak false positives? Fill feature failure? Currently the res is mostly empty, like 2mm above the acetal/glass boundary. I may desire to add another 20-30ml, reducing air to 70-80ml. It is throwing alarms a bit but I have yet to see a leak. But with 43 fittings, I'm not counting a leak out. Yes I checked for leaks de...