OK everyone, plenty of food for thought there, thanks for the replies.

I was considering a triple rad to cool the loop with the CPU, NB, SB, Mofsets. I'd like a second loop just for the graphics cards, it is the radiator for this I am unsure of for cooling two HD4870X2 cards. Would a dual 120mm rad be sufficient to cool two big Radeons?

Sorry to bother you all again, but I've a few queries, so without further ado, here goes: Will one aquero control two loops with tubemeters and flow meters in each? I have read items where people are concerned about the amount of heat that can be removed per radiator, would a dual 120mm rad be enough to cool two HD4870X2s ? I'm thinking of a triple rad for the system, CPU, NB, SB. Thanks, everyone.

I ran that board through the product assistant, and there are blocks for it.

Thanks very much!

The measurements for the filter would be great, so I can plan a cutout in the top of the case, thanks very much!

Yes, on the motorcycle oil filter, it is a disc that screws onto the base of the oil filter then the complete assembly screws onto the engine. When you replace the oil and filter, you take off the magnetic filter to use with the new oil filter. There will be grey paste on the magnetic filter which you clean off with a cloth, that's the microscopic metal particles collected by the mag filter. But, I too wonder how that would affect a PC cooling system.

First off, hello everyone. The new filter, can it be horizontal and vertically mounted, and what are the dimensions of it? ( I am trying to figure out if I can get it mounted on top of a Lian Li A770B). Also, I have used magnetic oil filters in my motorcycle before, have you tried putting a magnet to see if it picks up any microscopic metallic pieces, or is that just asking for disaster?

Zitat von »gr3if« For the Motherboard you have to use this:http://www.aqua-computer-systeme.de/shop…6fa7179768527aa or that:http://www.aqua-computer-systeme.de/shopsystem/product_info.php?cPath=7_10_1823&products_id=104&osCsid=de50637968dd9c75e6fa7179768527aa i dont know the range of this motherboard hookups for the bfg card u can may use this: http://www.aqua-computer-systeme.de/shopsystem/product_info.php?cPath=7_10_1822&products_id=86&osCsid=1198a9c7fd54718a00bcca821424a08f And about the sof...

Hello everyone! I have used bolt on watercooling kits in the past, but they have proved to be rubbish. Now I aim to buy a case from here, but I have a few questios: Is there a block that can be fitted to an Ageia PhysX card (BFG variant), and, the motherboard is a DFI ICFX3200-T2/G , (see here: http://us.dfi.com.tw/Upload/Product_Picture/icfxB.jpg ). So, which blocks can be fitted to that board, which will be running 2 HD2900XT, PhysX card, TV card, 5 hard drives, soundcard, and an intel quad co...