Want to be sure of something before I order my loop parts.

Vankrom

Newbie

Want to be sure of something before I order my loop parts.

Dienstag, 11. Februar 2020, 21:55

I am working on a water cooling loop and intend to use the D5 next. I will be using a total of 7 noiseblocker B12-P 120mm fans.

I am hoping that I can connect a splitty9 / splitty9 active to the D5 next and have the fans respond to accordingly.

Am I right in this assumption or am I missing something

Thanks in advance!

p.s is the d5 next compatible with the heatkiller tanks?

DRF

Junior Member

Dienstag, 11. Februar 2020, 22:00

Hello i dont know if i understood your question but with splitty9 you distribute power + 1 single PWM signal for every slot and retrieve 1 Tachy signal back

Vankrom

Newbie

Mittwoch, 12. Februar 2020, 03:05

Zitat von »DRF«

Hello i dont know if i understood your question but with splitty9 you distribute power + 1 single PWM signal for every slot and retrieve 1 Tachy signal back

Just wondering if the D5 next will have enough power to run the 7 fans or if i need the boost granted by the splitty9 active.

kandrey89

Newbie

Mittwoch, 12. Februar 2020, 03:35

https://www.blacknoise.com/datas/downloa…0_122012_de.pdf

B12-P has 1.92W consumption, so 7*1.92=13.44W and you have 25W fan power. So yes D5 Next should be able to power your fans!

ehupp01

Junior Member

Mittwoch, 12. Februar 2020, 17:51

Had mine setup with 8 fans and they could not reach full RPM so I added a Silverstone 8-Port PWM Fan Hub and it works great. I think the splitty9 would be a good choice also.

Zitat von »Vankrom«

Zitat von »DRF«

Hello i dont know if i understood your question but with splitty9 you distribute power + 1 single PWM signal for every slot and retrieve 1 Tachy signal back

Just wondering if the D5 next will have enough power to run the 7 fans or if i need the boost granted by the splitty9 active.

Vankrom

Newbie

Freitag, 14. Februar 2020, 19:39

Was that a regular or the "active" splitty9?

Zitat von »ehupp01«

Had mine setup with 8 fans and they could not reach full RPM so I added a Silverstone 8-Port PWM Fan Hub and it works great. I think the splitty9 would be a good choice also.

Zitat von »Vankrom«

Zitat von »DRF«

Hello i dont know if i understood your question but with splitty9 you distribute power + 1 single PWM signal for every slot and retrieve 1 Tachy signal back

Just wondering if the D5 next will have enough power to run the 7 fans or if i need the boost granted by the splitty9 active.

ehupp01

Junior Member

Samstag, 15. Februar 2020, 16:00

Did not use Splitty9 I used the Silverstone 8-Port PWM Fan Hub that is similar to the Active it is powered. :thumbup:

Zitat von »Vankrom«

Was that a regular or the "active" splitty9?

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »ehupp01« (15. Februar 2020, 16:02)

Vankrom

Newbie

Mittwoch, 19. Februar 2020, 00:21

Not got any experience with Silverstone products. Reliable?

Zitat von »ehupp01«

Did not use Splitty9 I used the Silverstone 8-Port PWM Fan Hub that is similar to the Active it is powered.

Zitat von »Vankrom«

Was that a regular or the "active" splitty9?

ehupp01

Junior Member

Mittwoch, 19. Februar 2020, 20:29

So far so good. First one I owned as well. :thumbup:

Zitat von »Vankrom«

Not got any experience with Silverstone products. Reliable?

Want to be sure of something before I order my loop parts.

Ähnliche Themen