• 31.10.2025, 06:49
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Leakshield install problems

Praetorian

Newbie

Leakshield install problems

Mittwoch, 24. November 2021, 19:12

Hello,

I'm having the following issues with the Leakshield:

When starting it seems like it wants to do a pressure test and then goes to ~130mbar and then drops to 54 or so. It maintains 54ish and then steadily starts climbing. (See Picture)

Aquasuite says: "Factory test with 50 ML test body".

I am simply trying to leak test the Ultitube/Leakshield/D5 Next itself to double check everything, and this is what I'm seeing. I had it hooked up to a radiator previously and I'm getting the same results.

Thanks.
»Praetorian« hat folgendes Bild angehängt:
  • leakshield setup.png
»Praetorian« hat folgende Datei angehängt:

Taubenhaucher

God

Mittwoch, 24. November 2021, 19:27

Your LEAKSHIELD is in Satus Release.
Have you configured the LEAKSHIELD yet?
You can find the configuration and the actions on the page "LEAKSHIELD".
Es gibt keinen Ausweg, den ein Mensch nicht beschreitet, um die tatsächliche Arbeit des Denkens zu vermeiden.
Thomas Alva Edison (1847-1931), amerik. Erfinder

Praetorian

Newbie

Mittwoch, 24. November 2021, 19:29

Zitat von »Taubenhaucher«

Your LEAKSHIELD is in Satus Release.
Have you configured the LEAKSHIELD yet?
You can find the configuration and the actions on the page "LEAKSHIELD".
I have yes, I don't have the pump connected or anything since it's just a leak test though. I updated the firmware and reset to factory defaults also.

Praetorian

Newbie

Mittwoch, 24. November 2021, 21:23

Well I made it further. I don't know what it wants. It seems to be calibrating, but I have no idea what it is calibrating

Edit Help would be much appreciated, I'm hoping to be able to get this working without an RMA.
»Praetorian« hat folgendes Bild angehängt:
  • aquasuite_2021-11-24_12-22-29.png

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Praetorian« (25. November 2021, 04:25)

Taubenhaucher

God

Donnerstag, 25. November 2021, 07:34

What happens when you set the LEAKSHIELD to Shield?
Es gibt keinen Ausweg, den ein Mensch nicht beschreitet, um die tatsächliche Arbeit des Denkens zu vermeiden.
Thomas Alva Edison (1847-1931), amerik. Erfinder

Shoggy

Sven - Admin

Donnerstag, 25. November 2021, 09:03

Zitat von »Praetorian«

Aquasuite says: "Factory test with 50 ML test body".
There went something wrong in the factory. The calibration process was not finished correctly. That can not be fixed by yourself and you will need a replacement device.

Please get in touch with us via e-mail and provide your full postal address and a phone number.

Ähnliche Themen