• 18.08.2026, 12:40
  • Register
  • Login
  • You are not logged in.

 

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Kaffefilter5

Newbie

Controlling an AquaComputer D5

Friday, April 17th 2015, 4:13pm

So I picked up my new AquaComputer D5 pump with build-in AquaBus and USB support today, and I hooked it up to the "Aquabus High" connector on my Aquaero 5 LT. The pump appears in the pump section in aquasuite, I then set the pump speed to "Set by controller" and added it to a controller based on the CPU temp. When I go to the pumps section in aquasuite, it says that the pump is running at 1-5%, but at 5000+ rpm, which is what it should run at at 100% (pic below). So does anyone have an idea of what I configured wrong in AquaSuite? This pump is obviously supposed to be adjustable, and I want it to run at about 1000-1800rpm at idle.

Thank You in advance! :D


sebastian

Administrator

Friday, April 17th 2015, 4:20pm

Try to run the pump in the manual mode. Can you change the pump speed?

Kaffefilter5

Newbie

Friday, April 17th 2015, 4:24pm

I set it to manual, and tried 10%, 30%, 50% and 80% power, but it keeps on running at like 5000rpm. Pic below at 50%.

Kaffefilter5

Newbie

Friday, April 17th 2015, 4:31pm

Try to run the pump in the manual mode. Can you change the pump speed?
btw thank you for so quick response! Is there an english customer support that I can contact?

EnigmaG

Senior Member

Friday, April 17th 2015, 5:13pm

hooked it to the usb and Look for a new firmware.

Kaffefilter5

Newbie

Friday, April 17th 2015, 5:25pm

finally got it working! Had to connect it with USB and then change the priority from USB to AquaBus. Thank you very much for very fast response

Similar threads