• 22.11.2026, 22:52
  • Register
  • Login
  • You are not logged in.

 

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

InfoSeeker

Senior Member

Looking for a Hydraulic Engineer

Tuesday, December 20th 2016, 10:11pm

I have a 3-port valve I would like to implement for flushing purposes, but I need some feedback from knowledgeable folks.

The 1/4" valve I am looking at has a Cv (Coefficient of Flow) of 0.75.
Is this sufficient for a typical cooling loop?

There is a 3/8" valve available that has a Cv of 1.5, but it is larger and would be more complicated to place.

:?:

AE5probigNGslave

Junior Member

Tuesday, December 20th 2016, 10:33pm

Hello,

I think that more important is DN (diameter nominal). 1/4" valves has DN=6 mm, 3/8" valves has DN=10 mm. I use valves for VC with 1/4" with DN=10 mm but standard 2-way.

I work in high pressure cleaners.

BR

George

InfoSeeker

Senior Member

Wednesday, December 21st 2016, 12:46am

Thanks George.

The 1/4" valve I am looking at has a stated "orifice" size of 4,8mm.
I assume the stated orifice is the diameter of the ball bore, and being the smallest constriction in the valve, correlates to the DN.

The 3/8" valve has a stated orifice of 7,1mm.

I suppose either valve will work, but the 3/8" will experience a lesser pressure drop.

I am a bit leery of the 1/4" valve's 4,8mm DN.

H-800.pdf

AE5probigNGslave

Junior Member

Wednesday, December 21st 2016, 11:09pm

Hello to Texas,

I look over the internet and you need full port ball valve.

Like this: http://www.valworx.com/product/3-way-lea…ull-port-14-npt

Orifice is 9,906 mm. :)


George

Similar threads