08.11.2025, 12:17
Change Language
Register
Login
You are not logged in.
Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
- 1
- 2
vanwouter
Newbie
Re: new water loop, very hi temps with QX9650. adv
Monday, January 21st 2008, 11:14pm
Thanks for the reply. I had a AC t-line temp probe in the water loop, but after installing all PC parts, it didn't work...think the metal inside the wires got broken. So, do not know water temp now.
I tried to take the temp probe out to replace it, but it is stuck in the metal PNC t-line fitting.
I tried to take the temp probe out to replace it, but it is stuck in the metal PNC t-line fitting.
Quoted from "hobbes"
1. forget bios temperatures, that's just guesswork. try to measure the water temperature
2. 44 litres is fine.
gr3if
God
Re: new water loop, very hi temps with QX9650. adv
Sunday, January 27th 2008, 11:27pm
For what you got you need at least a Thermochill PA120.3 rad.
Where do you get this Crap? Higher flow does not mean lower temps... and this radiator you are atlking about is about 3 degree better then any other 360... So if you have a good setup you can measure at a maximum 3 degree.
divve
Junior Member
Re: new water loop, very hi temps with QX9650. adv
Monday, January 28th 2008, 6:31pm
It's about €75 from an English shop I won't mention here. That's quite comparable to the Black Ice Extreme or the rads from Watercool.
I also don't want to listen to 1200 RPM fans. Here's another pint of view:
http://www.effizienzgurus.de/roundups/07radiatoren/dia/1.gif
...which case do you have that can fit 5x 360 rads? I might be interested in getting one too
I also don't want to listen to 1200 RPM fans. Here's another pint of view:
http://www.effizienzgurus.de/roundups/07radiatoren/dia/1.gif
...which case do you have that can fit 5x 360 rads? I might be interested in getting one too
Rockwool
Newbie
Re: new water loop, very hi temps with QX9650. adv
Saturday, February 9th 2008, 12:29am
Oh man really, he is talking about flow over 60l/h and about microstructure coolers. The Xt Di itselfs performs nearly the same if there is less flow.
But in fact you are talking about a maximum of 10degree at all. Think of two things:
1: Heat dissapation gets better the hotter the rad is.
2: He is using two Rads, which togheter works nearly like the one you pointed at.
Sorry to steal the tread, But is 60l/h enough ?
Im running somthing like 320l/h in my system
(22C room temprature and 28C water, 3x 120mm fans at 4,8V (40%))
divve
Junior Member
Re: new water loop, very hi temps with QX9650. adv
Sunday, February 10th 2008, 8:31am
anything above 25l/h is fine.
r u from USA?
Admittedly, at higher flow rates of over ~2l/m you reach a point of diminishing returns. However, under ~1l/m the heat removal from common CPU blocks begins to loose effectiveness at a higher rate. It easily can be 4C worse at 0.4l/m.
On an average system this may not have any consequence. For higher end overclocked systems on the other hand it will matter, when taking other factors into account such as noise levels and temps during hot weather.
....no I won't play fetch and post links again. The data is freely available out there from both American and European sources. All you have to do is look for it.
- 1
- 2