• 12.08.2025, 06:32
  • Register
  • Login

  • You are not logged in.

 

Little question for the 360 eco +

kazaflo

Junior Member

Little question for the 360 eco +

Friday, July 5th 2013, 3:16pm

Hi,
I just buy the 360 eco+ and i have some question about the pipe and fittings.
For persons who have a aquaduct i have a pipe inside the box and i wanna know what is the appropriate fitting because i don't if it's 8/10 or 8/11 or etc ...
I need to know for this devise :
http://www.materiel.net/waterblock-pour-…ckel-79978.html
http://www.docmicro.com/pieces/news-EKWa…ETAL_10466.html

Need your help !
:D
(sorry for my english, it's a little bad ^^)

EnigmaG

Senior Member

Friday, July 5th 2013, 3:32pm

P&C 8/6 is the AC standart

kazaflo

Junior Member

Friday, July 5th 2013, 3:45pm

Ac standart is 8/10 ?

EnigmaG

Senior Member

Friday, July 5th 2013, 3:56pm

No 8/6mm P&C

This post has been edited 1 times, last edit by "EnigmaG" (Jul 5th 2013, 6:30pm)

Jeremy

Junior Member

Friday, July 5th 2013, 6:05pm

The fittings on the Eco units are G1/4. You can use whatever barbs and tubing you want with it AFAIK.

If you're talking about the tubing INSIDE the unit, I'm not sure those are user-serviceable.

kazaflo

Junior Member

Monday, July 8th 2013, 10:40am

Ok, thanks, i have my answer now. I just buy 2 G1/4 fitting. I will install this tonight. ^^

kazaflo

Junior Member

Monday, July 15th 2013, 10:29pm

Hi, it's me again.
So, i have some problem with the installation of an 360 eco+.
I think all my connection are ok.
When i start my computer for that the water flows through the pipes. I heard the pump but no flow in the pipe and the fan in the aquaduct don't turn.
This is an image of the card (link with the cpu fan):
http://image.noelshack.com/fichiers/2013…0715-220847.jpg

I need help because i wil become crazy ^^

Jeremy

Junior Member

Monday, July 15th 2013, 10:38pm

Did you set it up as the instructors say to?

This post has been edited 1 times, last edit by "Jeremy" (Jul 15th 2013, 10:43pm)

kazaflo

Junior Member

Monday, July 15th 2013, 10:42pm

Yes. I take a picture of my computer and the aquaduct.
http://www.noelshack.com/2013-29-1373920…0715-223839.jpg

Jeremy

Junior Member

Monday, July 15th 2013, 10:44pm

How is your fan header configured in your BIOS? It'll need to be set up for voltage control instead of PWM control.

kazaflo

Junior Member

Monday, July 15th 2013, 10:53pm

it's PWM control. What is the voltage for the fan ? And when i start my computer i have a bip from the aquaduct.
When i start my computer, i just have one bip but no pump and fan turning ...

This post has been edited 2 times, last edit by "kazaflo" (Jul 15th 2013, 11:30pm)

Similar threads