• 23.08.2025, 23:25
  • Register
  • Login

  • You are not logged in.

 

Proper connection Aquaero 6 PRO + D5

Marucins

Junior Member

Proper connection Aquaero 6 PRO + D5

Thursday, May 7th 2015, 7:08pm

I bought Aquaero 6 Pro and D5 pump.
I Includes USB cable and 3 pin.

1. How do I connect the pump to the aquaero to fully control it?
2. Do I need to buy a 4 pin cable Aquabus?

InfoSeeker

Senior Member

Thursday, May 7th 2015, 8:31pm

From your post I will assume you have the Aqua Computer D5 pump motor with USB and aquabus interface

If so, you can use the 3 pin aquabus cablle included with the pump. The aquabus connectors on the D5 & aquaero are 4 pin, but only 3 pins are used.
use the aquabus plug on the D5 and the aquabus high on the aquaero



EDIT: did you get a satisfactory resolution to your reservoir top and clamp needs?

This post has been edited 3 times, last edit by "InfoSeeker" (May 7th 2015, 8:35pm)

Marucins

Junior Member

Thursday, May 7th 2015, 9:21pm

Quoted from "InfoSeeker"

From your post I will assume you have the Aqua Computer D5 pump motor with USB and aquabus interface

If so, you can use the 3 pin aquabus cablle included with the pump. The aquabus connectors on the D5 & aquaero are 4 pin, but only 3 pins are used.
use the aquabus plug on the D5 and the aquabus high on the aquaero
[attach]5250[/attach]
[attach]5251[/attach]

EDIT: did you get a satisfactory resolution to your reservoir top and clamp needs?


You're right I have exactly this the D5 pump.
I was afraid that I bought the wrong cable. In addition, I bought a 90 cm 3 pin.

Confusing is the 4 pin plug and 3 pin cable added.
This manual should be about the information that they act only 3 wires in the Aquabus :)

Thanks!

InfoSeeker

Senior Member

Thursday, May 7th 2015, 9:32pm

Actually, to confuse things a bit, the aquabus is a 4 pin bus, but the 4th pin is +5v (I think) and is used by other MPS devices using the aquabus ( i.e. flow sensor & pressure sensor).
You can use a 4 pin aquabus cable on the D5 pump, but it simply ignores the 4th pin.

Marucins

Junior Member

Thursday, May 7th 2015, 10:39pm

I have a sensor http://shop.aquacomputer.de/product_info…roducts_id=2294 connect it under the aquaero - FLOW socket?

Shoggy

Sven - Admin

Thursday, May 7th 2015, 11:35pm

Yes, with that cable.

Marucins

Junior Member

Friday, May 8th 2015, 6:17am

OK
I have this cable.

I wanted to make sure that connected to the FLOW or Aquabus

This post has been edited 1 times, last edit by "Marucins" (May 8th 2015, 6:23am)

Similar threads