Aquaduct XT 360 leaking at top

JorisS

Junior Member

Saturday, December 15th 2007, 12:44pm

1

Hi,

been experiencing problems with my aquaduct XT 360;

the plastic cover on the top, which is held in place by 8 screws and which is removed during the (re)filling process, seems to for some reason bend under the pressure or temperature of the water (usually between 22-28 degrees). Now the other day I noticed there was water coming out on both long sides of the cover, as can be seen on the picture below:

I don't know why this is, the screws are in as tight as possible. If I remove all screws and the plate, it is by no means flat. As far as I can tell the rubber seal ring is in proper place. Is this some kind of 'overpressure' protection of the system, or is something wrong?

Obviously not too happy with this...

Shoggy

Sven - Admin

Re: Aquaduct XT 360 leaking at top

Sunday, December 16th 2007, 2:13am

2

Quoted from "JorisS"

Is this some kind of 'overpressure' protection of the system, or is something wrong?

No, there is something wrong.
I would recommend to use a new seal.

JorisS

Junior Member

Re: Aquaduct XT 360 leaking at top

Sunday, December 16th 2007, 8:48pm

3

Where do I get one of those?

(I guess from you guys, but how? Is it guarantee/service?)

But is it normal that the plastic top cover gets bent?

It's not flat at all.

JorisS

Junior Member

Re: Aquaduct XT 360 leaking at top

Thursday, December 20th 2007, 11:57pm

4

Quoted from "JorisS"

Where do I get one of those?

(I guess from you guys, but how? Is it guarantee/service?)

But is it normal that the plastic top cover gets bent?

It's not flat at all.

Hello?

So yes I have problem - I'd appreciate some info/help in fixing it. Do you guys send out spare parts as a customer service? Should I send a mail to ask for it? What do I do?

Please let me know so I can lay hands on a new seal, and possibly a new plastic cover plate, one that's flat and hopefully stays that way

b0nez

God

Re: Aquaduct XT 360 leaking at top

Friday, December 21st 2007, 12:15am

5

Please write a Mail to support@aqua-computer.de, this is the best way

Stephan

Administrator

Re: Aquaduct XT 360 leaking at top

Friday, December 21st 2007, 12:47pm

6

You can buy any part as a spare part - no problem. Please write a mail.

JorisS

Junior Member

Re: Aquaduct XT 360 leaking at top

Saturday, December 22nd 2007, 2:27am

7

Ok I wrote a mail. Probably not the best time of the year but it's not really urgent anyway. Just hope to get it fixed. Preferably without paying for it, as it just doesn't seem right that such an expensive unit shows defects after only a couple of months of usage.

JorisS

Junior Member

Re: Aquaduct XT 360 leaking at top

Friday, December 28th 2007, 11:38pm

8

Quoted from "JorisS"

Ok I wrote a mail. Probably not the best time of the year but it's not really urgent anyway. Just hope to get it fixed. Preferably without paying for it, as it just doesn't seem right that such an expensive unit shows defects after only a couple of months of usage.

So is everybody on holidays atm?

Haven't gotten a reply or anything as of yet
:-/

@re@50

Foren-Inventar