• 22.08.2025, 17:29
  • Register
  • Login

  • You are not logged in.

 

Aquabus cable pinout (and small advice about aquero) needed

shteud

Newbie

Aquabus cable pinout (and small advice about aquero) needed

Tuesday, December 31st 2024, 1:09pm

Hello all!
I need to find a pinout to make this cable
https://shop.aquacomputer.de/Monitoring-…NEXT::3487.html
I have an RGBpx cable and plan to use these small connectors to make normal cable to connect OCTO 8 and Farbwerk 360 to Aquero 5xt. I just need to find a legit pinout for this cable.
Also, do I get the right to make OCTO and Farbwerk work with 5XT I need first to connect them via USB change to slave mod and only after that can I use them solely via Aquabus?

Taubenhaucher

God

Tuesday, December 31st 2024, 2:51pm

You can find the cable assignment in the instructions for the Aquaero and e.g. the Quadro under Support -> Downloads.
Re-flashing would only be necessary if you want to use a second Aquaero as a slave; this is not necessary for other devices with Aquabus. Nevertheless, the USB connection should always be connected, as not everything can be addressed via the Aquabus and the devices without USB cannot receive firmware updates.
Es gibt keinen Ausweg, den ein Mensch nicht beschreitet, um die tatsächliche Arbeit des Denkens zu vermeiden.
Thomas Alva Edison (1847-1931), amerik. Erfinder

shteud

Newbie

Friday, January 3rd 2025, 5:44pm

Quoted from "Taubenhaucher"

You can find the cable assignment in the instructions for the Aquaero and e.g. the Quadro under Support -> Downloads.
Re-flashing would only be necessary if you want to use a second Aquaero as a slave; this is not necessary for other devices with Aquabus. Nevertheless, the USB connection should always be connected, as not everything can be addressed via the Aquabus and the devices without USB cannot receive firmware updates.

Yes some how forgot about manuals :)
Thx

Similar threads