Aquaero/aquastream controller problem

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

bradley

Junior Member

Aquaero/aquastream controller problem

Monday, June 13th 2005, 1:37pm

Hi...

I have 2 problems that i hope someone could help me with.

1) I have connected a new aquastream controller v1.30 (green board) to my aquaero and it came up with an error

"aquastream too old or unavailable" ???

2) In order to see if i could get the aquaero to recognise the controler i then tried to reset the eeprom which i have done before, so i was waiting for the screen to say "eeprom resetted" but it never came on the screen, it came straight up with the dreaded words "eeprom erased" :'(

can any one give me any advice on what i could do to solve this...

Thanks

Regards

Bradley

Stefan_K.

Moderator

Re: Aquaero/aquastream controller problem

Monday, June 13th 2005, 4:45pm

1. just try again or check the cable

2. unfortunately you have to send it to aqua computer to get it flashed

http://www.youtube.com/modmymachine
http://www.twitch.tv/modmymachine

bradley

Junior Member

Re: Aquaero/aquastream controller problem

Monday, June 13th 2005, 8:33pm

Thanks for the replies...

tried the cables - disconnected then reconnected before i tried flashing...

do you know how much the flashing service costs please?

thanks

regards

Bradley

x-stars

God

Re: Aquaero/aquastream controller problem

Monday, June 13th 2005, 9:00pm

Quoted from "bradley"

Thanks for the replies...

tried the cables - disconnected then reconnected before i tried flashing...

do you know how much the flashing service costs please?

thanks

regards

Bradley

When you have a Firmware 1.3 AS-Controller there isn't a chance to get the controller falshed, it's still the latest version

.
The flash for the aquaero itself is so easy, you can do it by yourself @home - if you gat problems with it you can send your Ae to AC to reanimate your AE (this service is for free

"Live free or die: Death is not the worst of evils."

bradley

Junior Member

Re: Aquaero/aquastream controller problem

Monday, June 13th 2005, 9:15pm

Thanks for reply...

I flashed the aquaero to 3.20D quite a while back... but now it is absolutely lifeless...

There is nothing on the screen at all... seems to have erased all the setting's

So i think it is going to have to take the long trip back to A-C to get re-animated as you say... :'(

Bradley

x-stars

God

Re: Aquaero/aquastream controller problem

Monday, June 13th 2005, 10:42pm

Hm, the screen is black, but does the computer find the aquaero? (i don't think so, burt when it does there is a small chance to solve the problem by reflashing :-/)

"Live free or die: Death is not the worst of evils."

bradley

Junior Member

Re: Aquaero/aquastream controller problem

Monday, June 13th 2005, 11:44pm

worth a try...

I'll let u know how i get on...!

Regards

Bradley

bradley

Junior Member

Re: Aquaero/aquastream controller problem

Tuesday, June 14th 2005, 9:55pm

Update...!

My pc starts to pick up the Aquaero then tells me its an "unknown device"

so it still has power as the green light is on (on the back of the Aquaero)

Bradley

bradley

Junior Member

Re: Aquaero/aquastream controller problem

Friday, June 17th 2005, 12:08am

Quoted from "Stefan"

1. just try again or check the cable

2. unfortunately you have to send it to aqua computer to get it flashed

Hi stefan...

1.I tried connecting the cables again and again, still it does'nt work. it still says "pump too old or unavailable"

I then tried connecting the pump and controller on its own and it turns out that it is a faulty controller...

2. I think i have to send the Aquastream controller back along with my Aquaero too...! :'(

Regards

Bradley