• 25.03.2026, 15:21
  • Register
  • Login

  • You are not logged in.

 

aquagraFX G200 problem

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Hapsbanan

Newbie

aquagraFX G200 problem

Saturday, December 20th 2008, 9:32pm

Hello folks.

I seem to have a major problem with my aquagraFX G200 cooler on my Asus GTX260 TOP.
Looks like the cooler doesnt reach the GPU if i watch my temps.
In idle i get ~60c temps, and on load, it just bumps up to 115c in a few seconds and shuts down.

Anyone else having problem with this?
Any suggestions?

Regards.
//Hapsbanan

Shoggy

Sven - Admin

Sunday, December 21st 2008, 2:34am

I would recommend to remove the block and check if everything had proper contact.

Also a possible reason for the bad temperatures could be that the screws around the GPU are not tighten strong enough. You could tighten them a little bit more and test if it would make a difference. If so, just continue but be careful!

Hapsbanan

Newbie

Sunday, December 21st 2008, 3:15pm

It only had contact to one small corner of the GPU, which resulted in massive overheating.
It was not possible to tighten the screws any more that I already did.

Shoggy

Sven - Admin

Sunday, December 21st 2008, 5:12pm

Mhhh, it might be also possible that your card is not 100% identical to the reference layout. We also had this problem with some HD4870 cards. They looked exactly the same but the height between the RAM and GPU was a little bit different.

Hapsbanan

Newbie

Sunday, December 21st 2008, 10:27pm

This is the gfx I got:
http://asus.com/products.aspx?l1=2&l2=6&…335&modelmenu=2

Other people who got problems with this card and the aquagraFX G200 cooler?

Similar threads