• 16.04.2026, 17:16
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

Durchflußsensor für Aquaero

Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.

Cora-Partido

Newbie

Durchflußsensor für Aquaero

mardi 10 août 2004, 19:47

Sorry for writing in English but I don't know German.

I've bought in my country (Portugal) one flow sensor for aquaero but I didn't bought yet the cable that connects the sensor to the aquaero. It seems my shop doesn't have this cable and I need to wait some weeks till they having it.

So can someone please help me in the pinout of the sensor, until the correct cable arrives.

Many thanks
Best Regards

lucky777

Full Member

Re: Durchflußsensor für Aquaero

mardi 10 août 2004, 21:04

If you loock very carefully  ;) onto the flow-sensor you'll find the meaning of the pins ;)

But anyway, the middle pin is the signal pin, and if you hold the sensor, the cooling in/output point's at you, the left one ist the power (+4,5V to +24 V) and the right one ist the GND (-).

Hopefully this is what you wanted to know. ;D

If you'll use a different kind of flow-sensor which AC recommend ( see at onlineshop ) then I have no idea how the pins are set. But you can measure this out via the resistance of the pins !! 8)
LianLi PC V2000 ASUS A8V Deluxe AMD Athlon 64 3800+ ( 25°C - 42,3°C full load ) Gigabyte GVR80 X800PRO 480 GB HDD SAMSUNG Spinpoint's 2 GB CORSAIR PC3200 XL PRO YESICO 420 W Netzteil ...and a lot of AC-stuff

Cora-Partido

Newbie

Re: Durchflußsensor für Aquaero

mardi 10 août 2004, 21:30

Many Thanks!!!!

Fragom

Junior Member

Re: Durchflußsensor für Aquaero

mercredi 11 août 2004, 18:53

Citation de "lucky777"

If you loock very carefully  ;) onto the flow-sensor you'll find the meaning of the pins ;)

But anyway, the middle pin is the signal pin, and if you hold the sensor, the cooling in/output point's at you, the left one ist the power (+4,5V to +24 V) and the right one ist the GND (-).

Hopefully this is what you wanted to know. ;D

If you'll use a different kind of flow-sensor which AC recommend ( see at onlineshop ) then I have no idea how the pins are set. But you can measure this out via the resistance of the pins !! 8)


This handle is correct?


Thanks
Site: FaceNaWeb [img]http://seti.familie-friedrich.de/userstats.php?l=6&id=884[/img]

lucky777

Full Member

Re: Durchflußsensor für Aquaero

mercredi 11 août 2004, 19:03

I'll check it ...... work in progress ;)


Hi-Ho ! It seems that AC has already crossed the output in the Aquaero. Very smart :o

The correct wiring is: Let the MOLEX-Plug at the AE as it is and switch the BLACK wire with the YELLOW one at the flow-sensor :-[

This is the reason why the flow sensor won't work at one of the "normal" fan connectors, anyway just switch the to wires then it's ok.

Yours
LianLi PC V2000 ASUS A8V Deluxe AMD Athlon 64 3800+ ( 25°C - 42,3°C full load ) Gigabyte GVR80 X800PRO 480 GB HDD SAMSUNG Spinpoint's 2 GB CORSAIR PC3200 XL PRO YESICO 420 W Netzteil ...and a lot of AC-stuff

Dragonclaw

God

Re: Durchflußsensor für Aquaero

mercredi 11 août 2004, 19:09

i think theres a problem...but i did not find it yet ::)

checking too ;)


update:
lucky777 is right ;)

black and yellow have to be changed
Verwende keine sinnlose Gewalt. Hol einen größeren Hammer.

Fragom

Junior Member

Re: Durchflußsensor für Aquaero

mercredi 11 août 2004, 19:24

They pardon but I do not understand.  But I intend that correct of this handle says which to me the linking:  Pin 1, 2 and 3 of the Aquaero goes to bind to the Pin # | + of the Flow Sensor.  Which the correct position.  Thanks.

Site: FaceNaWeb [img]http://seti.familie-friedrich.de/userstats.php?l=6&id=884[/img]

Dragonclaw

God

Re: Durchflußsensor für Aquaero

mercredi 11 août 2004, 19:46



conector "Flow"

Pin 1 (right): signal (on the sensorpicture above: #, right)
Pin 2 (middle): +5V (sensor: +, left)
Pin 3 (left): ground (sensor -, middle)
Verwende keine sinnlose Gewalt. Hol einen größeren Hammer.

Fragom

Junior Member

Re: Durchflußsensor für Aquaero

mercredi 11 août 2004, 20:21

Citation de "Dragonclaw"



conector "Flow"

Pin 1 (right): signal (on the sensorpictur above: #, right)
Pin 2 (middle): +5V (sensor: +, left)
Pin 3 (left): ground (sensor -, middle)


Many Thanks.
Site: FaceNaWeb [img]http://seti.familie-friedrich.de/userstats.php?l=6&id=884[/img]

Dragonclaw

God

Re: Durchflußsensor für Aquaero

mercredi 11 août 2004, 20:34

no problem, but wait with saying thank you until it works ;)
Verwende keine sinnlose Gewalt. Hol einen größeren Hammer.

Fragom

Junior Member

Re: Durchflußsensor für Aquaero

jeudi 19 août 2004, 02:40

Citation de "Dragonclaw"

no problem, but wait with saying thank you until it works ;)


Sorry, but I have a problem. When installing the Flow Sensor in accordance with the project above, this does not function.

After seeing in detail the project, I think that:

Pin 1 (GND) Aquaero binds Pin T (half) Flow
Pin 2 (5V) Aquaero binds the Pin + (left) Flow
Pin 3 (rpm) Aquaero binds to the Pin # (right) Flow

Will be that thus he is correct the linking?
Site: FaceNaWeb [img]http://seti.familie-friedrich.de/userstats.php?l=6&id=884[/img]

Shoggy

Sven - Admin

Re: Durchflußsensor für Aquaero

jeudi 19 août 2004, 03:37



That's the wiring on my system and it works :)

Fragom

Junior Member

Re: Durchflußsensor für Aquaero

jeudi 19 août 2004, 18:43

Citation de "Shoggy"



That's the wiring on my system and it works :)


Ok, that connection is agreement with what above said but the Pin1 of the Aquaero is in right interest: the sequency is 3 - 2 - 1, ok?
Site: FaceNaWeb [img]http://seti.familie-friedrich.de/userstats.php?l=6&id=884[/img]

Shoggy

Sven - Admin

Re: Durchflußsensor für Aquaero

jeudi 19 août 2004, 19:03

No idea if it is numbered from left to right or the other way ;) Just look at the wiring and try this; it should work.

Dragonclaw

God

Re: Durchflußsensor für Aquaero

jeudi 19 août 2004, 19:35

well, in the manual it's nubered from right to left... ::)

but soon we'll have all possible combinations tested :D
Verwende keine sinnlose Gewalt. Hol einen größeren Hammer.

Fragom

Junior Member

Re: Durchflußsensor für Aquaero

vendredi 20 août 2004, 03:07

Citation de "Fragom"



Ok, that connection is agreement with what above said but the Pin1 of the Aquaero is in right interest: the sequency is 3 - 2 - 1, ok?  


ok, now already functions with this configuration! Finally!!!
Site: FaceNaWeb [img]http://seti.familie-friedrich.de/userstats.php?l=6&id=884[/img]

jcab

Full Member

Re: Durchflußsensor für Aquaero

mardi 24 août 2004, 02:32

Olá Face ;D