• 04.04.2026, 03:08
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

[enhencement request] Sensor calibration based on two points ?

Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.

llecaroz

Junior Member

[enhencement request] Sensor calibration based on two points ?

mardi 1 juin 2010, 08:09

Hello, I am really suprised by the calibration feature of the aquasuite/aquaero for temps sensors.
Normally, best calibrations systems are based on two points, a lower & highter point...
This allow to change the curve orientation/angle. From what I tried in the aquasuite, this appears not to be possible :(
& so on, you cannot calibrate your temps sensor regarding the CPU curve & the precision is not quite good !

So I hope that I was able to communicate with you the need of this feature as it is really missing in your product.
By the way, uses can use a sensor on the cpu socket reporting temps really lower than the one reported by the cpu but by calibrating them on two points, aqauasuite/aquaero could report a temp really similar to the cpu as calibrated on two point & having the correct curve angle/orientation...

thx in advance for your feedback
louis

Shoggy

Sven - Admin

mardi 1 juin 2010, 19:48

That function is not possible due to technical limitations.

Discussions similaires