• 07.02.2026, 11:23
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

Aqua component connection assistance requested

Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.

Praemontius

Newbie

Aqua component connection assistance requested

lundi 29 avril 2019, 18:15

Hello,

I'm missing something I am certain is basic, nonetheless I'm at a loss.

I have 24 Corsair LL120 fans that I want controlled by Aquasuite. To accomplish this I have obtained (6x) Splitty4, (6x) Quadro, (1x) Hubby7, and (1x) Aquareo 6 LT. I intend to connect (4x) LL120's per Splitty, (1x) Splitty per Quadro, and (6x) Quadros per Hubby. From there I will connect the Hubby and Aquaero each to the motherboard via USB header.

This is where I'm stuck... Each Quadro comes with a 5 pin usb connection, each Hubby has (1x) 5 pin connection, and (3x) 9 pin connections. Forgive my lack of knowledge, but how do I connect (6x) 5 pin connectors to the Hubby7?

Regards.

vvv850

Junior Member

lundi 29 avril 2019, 18:40

Like this:

Bartdude

Full Member

mardi 30 avril 2019, 07:07

Hmm why so many Quadro's? You need 6x PWM channels to run 4 fans from each Splitty 4, with 6 Quadro's and Aquaero Lt have you'll have 28! If you intend to use the 4 PWM on the Aquaero for something else then the most you'd require is 2 Quadro's and that would still leave 2x PWM free. ?(
"no shit lady, does it sound like i'm ordering pizza?"

Praemontius

Newbie

mardi 30 avril 2019, 09:17

Each Splitty4 supports exactly (4x) Corsair LL120's and serves solely as a connection surrogate for the Quadro.

The limitation is in the Quadro's ability to control no more than 64 addressable LEDs - which means for 24 fans, (6x) Quadros are required since Aqaueros cannot control rgbpx functionality.

Otherwise, I believe you're correct - if my intent was to simply to connect pwm fans - I could quite cleanly remove several Quadros from the equation...

Sadly I cannot.

Ce message a été modifié 1 fois. Dernière modification effectuée par "Praemontius" (30 avril 2019, 09:31)

Praemontius

Newbie

mardi 30 avril 2019, 09:19

vvv850;

Thank you for the picture. I believe it has made the path forward more clear, if not momentarily inconvenient.

Discussions similaires