• 30.10.2025, 23:24
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

New: AMPINEL: Active power management for graphics cards – safe and intelligent

  • 1
  • 2

Oceanlab

Newbie

mercredi 15 octobre 2025, 21:25

Quoted

Initially, only the version shown will be available, either with the latch facing the PCB or away from it

Tell me please

It is planned to purchase the asus rog astral 5090 liquid edition

Standard cables from the seasonic power supply unit with direct connectors will be used for connection.

Which version of your product is suitable for me?

Thanks for the answer!

vyoh

Newbie

dimanche 19 octobre 2025, 19:24

Will you be shipping this outside of Germany ? I am pretty scared of using my 5090 lately with the amount of melted cables i have seen on social media lately, so I really hope I can get my hands on this asap so I can go back to enjoying gaming

Shoggy

Sven - Admin

mardi 21 octobre 2025, 09:24

Zitat von »Oceanlab«

It is planned to purchase the asus rog astral 5090 liquid edition

Which version of your product is suitable for me?

You will need the the variant with the latch pointing towards the PCB.

Zitat von »vyoh«

Will you be shipping this outside of Germany ?

We ship worldwide, with a few exceptions.

Zitat von »EdwardN«

Can you make sure that ampinel works for 5090 founders edition or any founders edition card? The recent connectors for founders edition are angled and not 90 degree

This will not work with the current version, and you would have to use an extension cable. At this point, I cannot say whether there will be an adapted version available at a later date.

Zitat von »acaman_bela«

Maybe it is a stupid question, but since the output per pin currents regulated and monitored is there a good reason not to using a short extension cable (in a space restricted sff build) to connect it to the GPU?

It is possible to use an extension cable but you have to be aware that additional contact transitions can have a further negative impact on the current flow.

jwingy

Newbie

jeudi 23 octobre 2025, 01:53

As I understand it, some sort of extension cable would be required for this to work with a 5090 FE? If so, is there any specific type of cable you would recommend?

On the point of using an extension cable, it was said that: "...you have to be aware that
additional contact transitions can have a further negative impact on the
current flow." What does this mean / what are the implications of this exactly for a lay person? Thanks!

Asphroxia

Newbie

samedi 25 octobre 2025, 08:50

Just wanted to drop in and show my support for this product! very excited to finally have a proper solution compared to the other solutions before from other brands.
Also wanted to share my interest in the white model!

vyoh

Newbie

lundi 27 octobre 2025, 21:25

Do you know if this will be compatible with the MSI 5090 Suprim (the air cooled one), and which orientation I would need?

shinazero

Newbie

Hier, 08:23

Quoted from "vyoh"

Do you know if this will be compatible with the MSI 5090 Suprim (the air cooled one), and which orientation I would need?
have the same question.

Railgun

Full Member

Hier, 12:45

As November is in a couple of days, and this was indicated to ship mid-Nov, when can we expect to have it available for pre-order?

Quoted from "jwingy"

As I understand it, some sort of extension cable would be required for this to work with a 5090 FE? If so, is there any specific type of cable you would recommend?

On the point of using an extension cable, it was said that: "...you have to be aware that
additional contact transitions can have a further negative impact on the
current flow." What does this mean / what are the implications of this exactly for a lay person? Thanks!


For every interconnect, there's some loss/added resistance to the whole chain. The extension is required due to how the socket exists on the FE. Any appropriate cable should work. it's literally just an extension cable. Though I'd not use one.


YMMV.

TechBaguette

Newbie

Aujourd’hui, 21:18

I'm very interested in that device.
But most of the time, that kind of thing isn't designed for compatibility with riser in mind (which is too bad as riser avoid to put too much weight on motherboard port).
For exemple, I use the Cooler Master Vertical Graphics Card Holder Kit V3. Like most of riser holder, there is a vertical plate behind the graphic card.
On this model, between the verge of the 12VHPWR plug of the graphic card and the edge of the vertical plate of the holder, there is a thickness of nearly 2,5 cm.
it means there should be 2,5cm between the 2 connectors of the AMPINEL to make the device compatible (for exemple, it's impossible to use the WireView Pro 2).

Do you think it's possible with the AMPINEL?

Also i'm very interested in the white version to match the color of my rig, or even a silver one.
  • 1
  • 2

Discussions similaires