06.11.2025, 05:01
Changer la langue
S’inscrire
Connexion
Vous n’êtes pas connecté.
Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.
Top_Nurse
Senior Member
Re: Water Circuit Problem
mercredi 6 avril 2005, 01:42
Citation de "mindwarp"
Ok thks but about the order do you think cpu-gpu or the other way arround is bether my problem here is that both components release a lot of heat won't the heat realeased from one component increase the temperature of the other?
Actually not as much as you would think as everything gets hot. The difference is negligible. There are solid reasons for splitting lines, but this is not one of them and as I indicated it is highly advanced water cooling. Do yourself a favor and don't split your lines or you will be :'( about burned up computers.
Shoggy
Sven - Admin
Re: Water Circuit Problem
mercredi 6 avril 2005, 02:29
The order doesn't really mater because the water temperature is almost the same at every place within your circuit.
It's time for one of my unique examples to explain this.
Let's start with a picture ;D
Imagine you would move your finger with a fast speed across the plates and finally put it in water. I would say you should be ok after this and could do it again and again
But what would happen if you move your finger slowly across the plates?
Mhhh, do you smell this too? :-X :
And now imagine the finger would be the water in your circuit, the plates are CPU, GPU and CS, and the water would be our radiator.
edit: I forgot something... KIDS, DON'T TRY THIS AT HOME!
It's time for one of my unique examples to explain this.
Let's start with a picture ;D
Imagine you would move your finger with a fast speed across the plates and finally put it in water. I would say you should be ok after this and could do it again and again
But what would happen if you move your finger slowly across the plates?
Mhhh, do you smell this too? :-X :
And now imagine the finger would be the water in your circuit, the plates are CPU, GPU and CS, and the water would be our radiator.
edit: I forgot something... KIDS, DON'T TRY THIS AT HOME!
Man_In_Blue
Moderator
Re: Water Circuit Problem
mercredi 6 avril 2005, 03:36
The order doesn't really mater because the water temperature is almost the same at every place within your circuit.
It's time for one of my unique examples to explain this.
Let's start with a picture ;D
Imagine you would move your finger with a fast speed across the plates and finally put it in water. I would say you should be ok after this and could do it again and again
But what would happen if you move your finger slowly across the plates?
Mhhh, do you smell this too? :-X :
And now imagine the finger would be the water in your circuit, the plates are CPU, GPU and CS, and the water would be our radiator.
edit: I forgot something... KIDS, DON'T TRY THIS AT HOME!
I'm lying on the floor... it's to stupid for my smashed brain... ;D
Or witsh other words: LOL!
But shoggy is right!
Man In Blue