12.01.2026, 15:31
Changer la langue
S’inscrire
Connexion
Vous n’êtes pas connecté.
Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.
Shoggy
Sven - Admin
Advance notice: aquagrafx G92 for 8800GT cards
jeudi 8 novembre 2007, 21:21
Today we announce the addition of the new AquagraFX G92 full cover waterblock to the Aqua Computer range. This cooler fits the 8800GT and is manufactured from copper with a finished weight of 480 grams.
Despite the low profile of ~6 mm, the cooler with its broad 17 mm channels allows an unhindered flowrate which is further maximised with the use of G1/4 connections. An efficient cooling structure which guarantees optimal heat removal is incorporated over the GPU itself.
The graphics processor is cooled, as is the VRAM together with the 10 voltage regulators. In addition, another three voltage regulators which are not fitted on the current card can also be cooled with this design.
The lid is currently manufactured from high-grade steel, but there will be a forthcoming plexiglas option. The plexiglas lid will have G1/4 threads so that the connections can be configured from either side.
The AquagraFX G92 will cost 79,90 euros; advance orders can be placed now. The delivery starts within approx. 10 days.
Here are a couple of pictures of the prototype. The production quality will be higher for the release models and of course there will be the familiar engraving on the lid.
Despite the low profile of ~6 mm, the cooler with its broad 17 mm channels allows an unhindered flowrate which is further maximised with the use of G1/4 connections. An efficient cooling structure which guarantees optimal heat removal is incorporated over the GPU itself.
The graphics processor is cooled, as is the VRAM together with the 10 voltage regulators. In addition, another three voltage regulators which are not fitted on the current card can also be cooled with this design.
The lid is currently manufactured from high-grade steel, but there will be a forthcoming plexiglas option. The plexiglas lid will have G1/4 threads so that the connections can be configured from either side.
The AquagraFX G92 will cost 79,90 euros; advance orders can be placed now. The delivery starts within approx. 10 days.
Here are a couple of pictures of the prototype. The production quality will be higher for the release models and of course there will be the familiar engraving on the lid.
Citation de "gr3if" 
Mike44
Junior Member
Re: Advance notice: aquagrafx G92 for 8800GT cards
jeudi 7 février 2008, 03:32
Oh, okay 
! Great! So I guess with the plexi top, there are holes on the upper and lower sides of the inlet/outlet ports? So for the inlet port, you can just cap off, say, the top hole and use the bottom. And then for the outlet, I could cap off the bottom and use the top? Or something like that?
This is good info since I would like to cool two of these cards in series and would hate to use a 90 elbow out of one card, loop to the next, and a 90 elbow into the second one. It just wouldn't look as nice!! ;D
One more thing (I don't think it does, but...) the plexi top doesn't add that much more height to the cooler does it? Like, it wouldn't make it take up a second slot right? Again, sorry, just a bit hard to tell from the pics.
Okay thanks!!
Mike
! Great! So I guess with the plexi top, there are holes on the upper and lower sides of the inlet/outlet ports? So for the inlet port, you can just cap off, say, the top hole and use the bottom. And then for the outlet, I could cap off the bottom and use the top? Or something like that?This is good info since I would like to cool two of these cards in series and would hate to use a 90 elbow out of one card, loop to the next, and a 90 elbow into the second one. It just wouldn't look as nice!! ;D
One more thing (I don't think it does, but...) the plexi top doesn't add that much more height to the cooler does it? Like, it wouldn't make it take up a second slot right? Again, sorry, just a bit hard to tell from the pics.
Okay thanks!!
Mike
