Aquastream XT Ultra

Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.

johnolg

Newbie

Aquastream XT Ultra

lundi 25 février 2008, 12:31

Hi Guys

Just got my Aquastream XT Ultra and I am having a problem with the frequency setting.
If I set the Aquastream to "Automatic frequency settings", it spends about 5 minutes trying to find its optimal frequency before settling at about 80Hz. at which it vibrates a lot and is very loud. After a bit of trial and error I found its best setting (for noise) seems to be 58Hz. My questions are:

1. Is this normal?
2. Can I damage the pump by manually setting the frequency?

Ive updated the Firmware to 1009 which made no difference

Thanks for any Help in Advance

pharao

Moderator

Re: Aquastream XT Ultra

lundi 25 février 2008, 13:24

1) don't know, i have no Aquastream

2) no, usually not. not with your "normal" Firmware. AC has a Freeware-version without limitations and with that you can (physically) damage the pump if you set the frequency too high. so don't worry.

Gute work-live-balance ist, wenn man von seinem Privatleben erschöpfter ist als von der Arbeit.

gr3if

God

Re: Aquastream XT Ultra

lundi 25 février 2008, 16:11

You can set the frequency manually to 58heart no problem at all.

johnolg

Newbie

Re: Aquastream XT Ultra

lundi 25 février 2008, 17:58

Another question is why does the pump run so badly with Automatic Frequency Settings?

gr3if

God

Re: Aquastream XT Ultra

mardi 26 février 2008, 12:37

Real Aw? No one can tell you the real reason. Even Ac is sometimes struggeling.

Stephan

Administrator

Re: Aquastream XT Ultra

mardi 26 février 2008, 19:32

You can setup any frequency, it will never damage the pump.

The pump is running most silent at 58-61 Hz. You can easily find this out if you have a look at the Current Graph in the Software. The pump will take the lowest current in this range so it runs in the smoothest way.