• 20.06.2025, 17:19
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

Temp sensor and general Poweradjust 2 stuff

Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.

Ace Adey

Newbie

Temp sensor and general Poweradjust 2 stuff

dimanche 30 octobre 2011, 19:53

hi guys,
As it stands im using a single loop with laing pump controled via USB poweradjust 2. Im familiar with most of a computers electronics to maintain and monitor. The rig i own originally had two loops thus two controllers. Where poweradjst 2 sits there are two cables with one connected, showing the old loop disconnected.
Aquasuite shows rpm and i run at 70% all of the time. i believe the old temp sensor is disconnected also. do they typically run (two pins) from Poweradjust 2 into the reservoir? Without manual im guessing and im wanting to get it plugged back into Aquasuite. im comfortable with just the one loop.
there is a worklog available here. im trying to email mac1as...

Ace Adey

Newbie

dimanche 30 octobre 2011, 20:27

[img]http://www.techpowerup.com/forums/attachment.php?attachmentid=44167&stc=1&d=1320002740[/img] hmm so this is poweradjust 2. if i have a two pin temp sensor probe, can you tell me where to connect it to please?

Shoggy

Sven - Admin

lundi 31 octobre 2011, 15:10

The red one is the connector for the temperature sensor:



You will have to use a 10kOhm NTC sensor, otherwise it will not work or provide wrong temperature values.

wramey

Non enregistré

Poweradjust 2

mercredi 9 novembre 2011, 05:06

Greetings all:

I am new to this technology. I have a Poweradjust 2 connected to my AE 5. I have all of my fan headers loaded on the AE5. Where do I plug my 3-pin fan into the Poweradjust 2 so that AE5 will recognize it?

Thank you in advance.

Shoggy

Sven - Admin

jeudi 10 novembre 2011, 11:53

The aquabus connectors are marked red in this drawing:

Discussions similaires