• 20.06.2025, 10:12
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

AQ5 setup LED STRIP

Barfastic

Non enregistré

AQ5 setup LED STRIP

jeudi 19 juillet 2012, 07:08

Hello all!

I have purchased myself an AQ5 pro, along with 3 PA2 ultras.

What i wanted to ask is, which port should i connect 2 led strips i have to?

Let me also note, i have 2 swiftech 35x pumps that have pwm control.

If i connect the led to the pwm ports, where should i connect my pumps to have control?
Or
If i connect the pumps to the pwm ports, where should i connect the led strips to?

Any advice tips would be great!

Thanks alot :)

Shoggy

Sven - Admin

jeudi 19 juillet 2012, 15:46

You can use the LED stripes with the two PWM ports. Do not confuse these ports with the PWM speed control signal. These two ports use a pulsed 12V signal and do not work as a PWM controlling signal like you have it on fan channel 4.

For the pumps you could get a 4-pin y-adapter and connect it to the 4th fan channel. This channel offers are PWM controlling signal. The power for the pumps should come directly from the PSU.

Discussions similaires