• 03.04.2026, 15:20
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

Proper connection Aquaero 6 PRO + D5

Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.

Marucins

Junior Member

Proper connection Aquaero 6 PRO + D5

jeudi 7 mai 2015, 19:08

I bought Aquaero 6 Pro and D5 pump.
I Includes USB cable and 3 pin.

1. How do I connect the pump to the aquaero to fully control it?
2. Do I need to buy a 4 pin cable Aquabus?

InfoSeeker

Senior Member

jeudi 7 mai 2015, 20:31

From your post I will assume you have the Aqua Computer D5 pump motor with USB and aquabus interface

If so, you can use the 3 pin aquabus cablle included with the pump. The aquabus connectors on the D5 & aquaero are 4 pin, but only 3 pins are used.
use the aquabus plug on the D5 and the aquabus high on the aquaero



EDIT: did you get a satisfactory resolution to your reservoir top and clamp needs?

Ce message a été modifié 3 fois. Dernière modification effectuée par "InfoSeeker" (7 mai 2015, 20:35)

Marucins

Junior Member

jeudi 7 mai 2015, 21:21

Citation de "InfoSeeker"

From your post I will assume you have the Aqua Computer D5 pump motor with USB and aquabus interface

If so, you can use the 3 pin aquabus cablle included with the pump. The aquabus connectors on the D5 & aquaero are 4 pin, but only 3 pins are used.
use the aquabus plug on the D5 and the aquabus high on the aquaero
[attach]5250[/attach]
[attach]5251[/attach]

EDIT: did you get a satisfactory resolution to your reservoir top and clamp needs?


You're right I have exactly this the D5 pump.
I was afraid that I bought the wrong cable. In addition, I bought a 90 cm 3 pin.

Confusing is the 4 pin plug and 3 pin cable added.
This manual should be about the information that they act only 3 wires in the Aquabus :)

Thanks!

InfoSeeker

Senior Member

jeudi 7 mai 2015, 21:32

Actually, to confuse things a bit, the aquabus is a 4 pin bus, but the 4th pin is +5v (I think) and is used by other MPS devices using the aquabus ( i.e. flow sensor & pressure sensor).
You can use a 4 pin aquabus cable on the D5 pump, but it simply ignores the 4th pin.

Marucins

Junior Member

jeudi 7 mai 2015, 22:39

I have a sensor http://shop.aquacomputer.de/product_info…roducts_id=2294 connect it under the aquaero - FLOW socket?

Shoggy

Sven - Admin

jeudi 7 mai 2015, 23:35

Yes, with that cable.

Marucins

Junior Member

vendredi 8 mai 2015, 06:17

OK
I have this cable.

I wanted to make sure that connected to the FLOW or Aquabus

Ce message a été modifié 1 fois. Dernière modification effectuée par "Marucins" (8 mai 2015, 06:23)

Discussions similaires