• 27.07.2025, 17:09
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

pump question

kdurning

Non enregistré

pump question

vendredi 11 septembre 2015, 01:05

I have an Aquaero 6xt, 2 poweradjust 3, and 2 Aquacomputer D5 Pump Motor with PWM Input. I am using all the 4 pin fan connections on the Aquero, the poweradjusts were bought to control the pumps. The fan connections on the poweradjusts are 3 pin, can i just change the connector and run the pwm off the 3 pin fan connector of the poweradjusts? If not can I utilize the 2 pin connector on the Aquaero?

edit: part number on the pumps are 41105

Ce message a été modifié 1 fois. Dernière modification effectuée par "kdurning" (11 septembre 2015, 03:23)

sebastian

Administrator

vendredi 11 septembre 2015, 06:57

Citation de "kdurning"

can i just change the connector and run the pwm off the 3 pin fan connector of the poweradjusts?
No, the outputs ar voltage controlled not PWM.

Citation de "kdurning"

If not can I utilize the 2 pin connector on the Aquaero?
No, the connector has a dirrerent signal - you can control with this connector LEDs (12V) directly, but no PWM Fan/Pumps.

Discussions similaires