• 25.08.2025, 09:38
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

Aquaero solder rookie misktake

xhamster

Newbie

Aquaero solder rookie misktake

mercredi 2 juin 2021, 10:28

I think I over heat the board and the ring comes off, Is there any way to fix it? Any tips will be appreciate.

Thanks. Pics attached
xhamster a envoyé le fichier suivant :
  • DSC_2044 1.jpg (444,07 kB - téléchargé 183 fois - Dernier téléchargement : 15 juillet 2025, 09:55)

sebastian

Administrator

mercredi 2 juin 2021, 10:36

The 2 Pads in the middle are ground. This 2 pare are connected in the bottom pcb layer. I think you pcb is working, you have only connect the 2 Pins on the bottom layer.

xhamster

Newbie

mercredi 2 juin 2021, 12:06

Citation de "sebastian"

The 2 Pads in the middle are ground. This 2 pare are connected in the bottom pcb layer. I think you pcb is working, you have only connect the 2 Pins on the bottom layer.


Unfortunately the back ring is off too. I tried to solder it directly on the board but it won’t boot the fans.
What is the ring called? I’m think buying some online to replace them order to see if it will help
Back pic attached.
xhamster a envoyé le fichier suivant :

sebastian

Administrator

mercredi 2 juin 2021, 13:06

this is the 12V supply, the pad is directly connected to a inner layer.
you can try to connect the 12V supply to the + connector from the capacitor next to power connector.

xhamster

Newbie

jeudi 3 juin 2021, 07:59

Citation de "sebastian"

this is the 12V supply, the pad is directly connected to a inner layer.
you can try to connect the 12V supply to the + connector from the capacitor next to power connector.


Is this you're talking about?
xhamster a envoyé le fichier suivant :
  • DSC_2047.jpg (617,81 kB - téléchargé 153 fois - Dernier téléchargement : 28 juin 2025, 11:31)

sebastian

Administrator

jeudi 3 juin 2021, 20:42

Citation de "xhamster"

Is this you're talking about?
no, this is the Ground Terminal.

Discussions similaires