Hallo,
mit dem Farbwerk360 kannst Du weder das Mainboard, noch den RAM ansteuern, das wird nicht unterstützt, es gehen nur direkt anschließbare LEDs, wie Strips oder Lüfter, evtl. noch Fremdcontroller, die auch per Mainboard steuerbar sind.

Nicht von Aquacomputer, da müsstest Du dann mal nach anderer RGB Software suchen, ich kann aber nicht sagen wie gut die funktionieren, ich hatte mal OpenRGB installiert, um die ArmoryCrate von ASUS zu umgehen, habe mich damit aber nicht weiter auseinandergesetzt.

Ob das Farbwerk ansteuerbar ist weiss ich nicht, das Board und der RAM sind, wie gesagt, nicht mit der Aquasuite oder dem Farbwerk ansteuerbar.

Citation de "RCS_99"

Nun habe ich irgendwo gelesen dass bei Asus Aura bei 120 LEDs (?) Schluss ist

In deinem Handbuch für das ROG STRIX
B550-F GAMING stehter ansteuerbare (Gen2) Header unterstützt ansteuerbare RGB WS2812B LED-Leisten (5V/Data/
Ground) mit einer maximalen Leistung von 3 A (5 V). Die ansteuerbaren Header auf diesem Board
können zusammen maximal 500 LEDs bedienen.

Klemm doch mal die Graka an den ersten Port des Hubs und dann den Rest.

Signal RGB has added support for the Farbwerk360 but you have to set up the Farbwerk360 channels in Aquasuite a certain way before Signal RGB can control it. If you want the details let me know and I will post them (in English). Signal RGB can also control your mobo and RAM LEDs so that is only solution I am aware of that would be able to control everything.

I don't think OpenRGB has added support yet.

Citation de "Speedy-VI"

Signal RGB has added support for the Farbwerk360

Nicht benutzen! Damit funkioniert die aquasuite und 90% der Funktionen nicht mehr.

Ich betreibe am Farbwerk360 mit 4 Splitty
735 Led's da flackert nix

Citation de "sebastian"

Citation de "Speedy-VI"

Signal RGB has added support for the Farbwerk360

Nicht benutzen! Damit funkioniert die aquasuite und 90% der Funktionen nicht mehr.

Oh I did not know that using Signal RGB to control a Farbwerk360 was a problem. Apologies for giving bad advice.

I just stumbled upon the fact that they have added support for the Farbwerk360 and Nano. There is a procedure that has to be done in AQS first that involves enabling Ambientpx, setting all channels to 90 LEDs and setting the background color to black for all of them. The last step in the procedure is to stop the Aquasuite service and close Aquasuite. If this means that Signal RGB can control the Farbwerk360 but only if and when Aquasuite and the service are not running, then it is completely useless to me. Is this what you mean by Aquasuite and 90% of the functions not working?

Citation de "Speedy-VI"

Is this what you mean by Aquasuite and 90% of the functions not working?

sure, when the servie is not running, the most of the functions not working.

Ich habe an den Splittys nochmals passive Kabelsplitter angesteckt mit 6 Abgängen das geht, da Du am Splitty bis 200 Leds betreiben darfst.
Mein Rams sind Ohne Licht Du wirst dann wohl zu Openrgb greifen müssen um die Rams anzupassen.

Es können alle Anschlüsse belegt werden.
Und mit dem Farbwerk kannst du Dir eine schöne Thermalanzeige basteln, die beiden LED-streifen oben und unten am Gehäuse geben CPU und GPU Temperatur wieder, wenn ich im Windows am Daddeln bin.
Das Foto entstand grade unter Debian da kann ich leider nichts Steuern und wird auch nichts angesprochen da das System nicht unterstützt wird was aber nicht schlimm ist den Unter Linux arbeitet man und da muss man sich keine Gedanken um Temperaturen machen.

Citation de "sebastian"

Citation de "Speedy-VI"

Is this what you mean by Aquasuite and 90% of the functions not working?

sure, when the servie is not running, the most of the functions not working.

Yes I understand that. What I don't understand is why their procedure says to stop the Aquasuite service and close the program. I suspect that anyone who has a Farbwerk360 is probably using Aquasuite and they are not going to stop doing so just so Signal RGB can control their Farbwerk. Enabling Ambientpx and settings all channels to 90LEDs with black background color seems to be setting up the Farbwerk360 to be in a "blank" state so that Signal RGB can send data through the Farbwerk to the LEDs. I don't see why the AQS service and program need to be stopped.

The only reason to try doing this is to have ONE program controlling ALL RGB. RGBpx is quite good, but it can't control mobo, RAM, or GPU LEDs, and I seriously doubt that you will ever attempt to do so (with good reason). Signal RGB and Open RGB both support a lot of third party devices but they way they work is very different. I have played around with both of them and prefer OpenRGB. I use it to control the LEDs on my mobo, RAM, and GPU. If they add support for the Farbwerk360 I will probably try it because having a single program control everything is the Holy Grail of computer RGB control. The closest thing to an "Everything Solution" is Corsair iCue, which I refuse to install.

BTW - Several months ago you stated that RGBpx port synchronization would be added to a future release of AQS. Is this still planned? I have 2 Farbwerk360's and found out the hard way that there is no sync between them. I don't know if sync can be supported over USB. If it can, that would be best because then any device with an RGBpx port and a USB connection could by synched. If sync over USB will not work then could the unused aquabus port on a FW360 be used to send a sync signal or a START trigger to another FW360? I know that the aquabus does not have enough bandwidth to carry RGB data, but it could carry a simple sync signal, or a START trigger from a Master FW360 to a Slave FW360. Thanks in advance for any insights about adding RGBpx port sync.