16.04.2026, 17:59
Changer la langue
S’inscrire
Connexion
Vous n’êtes pas connecté.
Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.
moe
Senior Member
Re: Fill/bleed and flush a system
lundi 3 mars 2003, 23:27
hi and welcome...
i think, it would be not bad, if you install a T-part (in german t-stück) to plug a piece of tube with an cork to flush out.
for refilling the tip ahead would be the only possibility and is really easy to realize
greetz
i think, it would be not bad, if you install a T-part (in german t-stück) to plug a piece of tube with an cork to flush out.
for refilling the tip ahead would be the only possibility and is really easy to realize
greetz
EpS
Senior Member
Re: Fill/bleed and flush a system
lundi 3 mars 2003, 23:33
Citation de "Flying_Dutchman"
[klugscheiß]The right grammer would look like this: "Unplug all cables and lay your case on its back..."[/klugscheiß]
Sorry, ich weiß nich, was Klugscheiß auf Englisch heißt...
;D
Der war gut...
Aber Recht hast du. Hab auch kurz überlegt und mich dann fürs falsche entschieden...
454-bigblock
Senior Member
Re: Fill/bleed and flush a system
mardi 4 mars 2003, 00:05
Thanks!
Figured the filling tip out within seconds after posting ;D
Another question:
Will the P&Q plugs work with silicone tubing with the same messurements?
-Hugo
No, you should´t do that. AC advises trongly to use PUR-tubings, because Silicon is too soft to fit corrrect.
Where are you from?
Aktuelle Statistiken von aquacomputer bei seti@home gibt´s hierWARNING: The modding-stunts in this forum were made by unprofessional lazy fools an therefore should not be performed by anyone, anywhere for any reason!
454-bigblock
Senior Member
Re: Fill/bleed and flush a system
mardi 4 mars 2003, 00:08
no way, jose!
only PUR-tubes... silicone is way to soft! your system would leak like a women during her period! ;D
Ui! Du bist ja krass :-)
Aktuelle Statistiken von aquacomputer bei seti@home gibt´s hierWARNING: The modding-stunts in this forum were made by unprofessional lazy fools an therefore should not be performed by anyone, anywhere for any reason!
kampfsau
God
Re: Fill/bleed and flush a system
mardi 4 mars 2003, 00:31
OK, I´ll probably order the stuff with 10mm hose plugs instead then. Not a big fan of L-plugs..
L-Plugs?
i think you´re mistaken... the PnC-plugs come in 2 versions: straight and L-type... it depends which suits you better
but trust me: the PnC-system is WAY more efficient... it´s a well tested model taken from air-pressure equipment and works absolutely leak-free! (of course if you connect it right ;D )
my first watercooling system had a mix of hose-plugs and PnC-connectors... after the first installation i had already ordered PnC-stuff for the rest of my system, i was astonished of the effectiveness and yet the simplicity of the PnC-system!
trust us users on this one...
there is no gravity - the world sucks
woodstock
God
Re: Fill/bleed and flush a system
mardi 4 mars 2003, 11:55
HeyHey!
Look at this! Most of the People have used the P&C System and as you can see, the PUR hose can be bend in a relatively small radius. As far as I know it can be bend a lot better than silicon tubing because it will not fold as easy as silicon!
Woodstock
edit:
ojo's Case
Akula's case
frolicfresser´s case
Look at this! Most of the People have used the P&C System and as you can see, the PUR hose can be bend in a relatively small radius. As far as I know it can be bend a lot better than silicon tubing because it will not fold as easy as silicon!
Woodstock
edit:
ojo's Case
Akula's case
frolicfresser´s case