11.08.2025, 21:21
Changer la langue
S’inscrire
Connexion
Vous n’êtes pas connecté.
Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.
- 1
- 2
verf
Junior Member
Advice, aquagratix for X1800 XT
dimanche 15 janvier 2006, 03:48
So I purchased an x1800Xt and want to set up a cooling solution using "aquagratix for X1800 XT", I'm completely new to this (I honestly don't know anything) so can someone give me the full run down of what extra components I need and maybe some links to figure this out, thanks.
I know usually people that mod and OC know what they are doing, but I believe with some good advice I can get the job done.
I know usually people that mod and OC know what they are doing, but I believe with some good advice I can get the job done.
verf
Junior Member
Re: Advice, aquagratix for X1800 XT
dimanche 15 janvier 2006, 07:27
Citation de "MUFFDIVER"
so you want every item basicaly and the links???
EDIT...
What case you got and what is your system setup ie. CPU etc.
Yes it seems I need every item and the links, I'm only looking to cool my graphics card because the stock fan cooler is way too loud.
but my CPU is AMD Athlon 64 3800 s939, mobo is Gigabyte GA-K8NF-9 [nforce4 4X/AMD-S939/DDR400/PCI Ex16/SATA/G-LAN]. If you needed that.
I don't know about the case, it's pretty standard, has two fan mounts at the back, one for the power supply and just an extra fan, and a vent on the side for the cpu, and just a few smaller vents here and there. I'm guessing I'll need a new case too?
MUFFDIVER
Full Member
Re: Advice, aquagratix for X1800 XT
dimanche 15 janvier 2006, 08:58
Hmmm this is mine so from here look at the top and bottom especially
But can you take a pic of your case from the top (Where radiator and resevoir can go "!but res can go in front!") and from the fan mounts you suggested and from there wel see YA. :
But if you do decide to get a new case then just think $$$ going up....
But can you take a pic of your case from the top (Where radiator and resevoir can go "!but res can go in front!") and from the fan mounts you suggested and from there wel see YA. :
But if you do decide to get a new case then just think $$$ going up....
verf
Junior Member
Re: Advice, aquagratix for X1800 XT
mardi 17 janvier 2006, 12:26
nope it is just plug and play and i will get you the list as soon as i can + i need a pic of you pc and where you want it to be mounted so i know what you need ie. connecters and if you are unable to get a pic then just say..
I can get a pic, but like I said I have no access to my PC at the moment to take it. I will post it soon.
verf
Junior Member
Re: Advice, aquagratix for X1800 XT
mardi 17 janvier 2006, 18:21
1/8" is the connectors size
"Set 2 Stück Anschluss G 1/8, plug&cool straight"
"Anschluss plug&cool straight G 1/8 Innengewinde"
"Anschluss plug&cool straight G 1/8"
"barb 10 mm G 1/8 with O-gasket-gasket"
Which one? And do I need two of these?
MUFFDIVER
Full Member
Re: Advice, aquagratix for X1800 XT
mercredi 18 janvier 2006, 13:50
This is what I want to do: The radiator, pump and reservoir are mounted at the top of the PC case on the outside
So how many fittings and connectors do I need to buy? Any advice on this setup?
???
The mount for the radiator to go on the top will send the flow into the case as they are straight connecters so you will be better off having the pump inside the case...
Umm and the resevoir also mounted at the top like this
Is this what you want...
This would make your setup much easier.
If this is a yes then i will sort you an order out.
What case do you have i wll google it and work it out from there. :
- 1
- 2