very nice job, what hoses and connections are you using?

Yep they look alot different to my AC connectors, and your flow rate is much more than min, which reports about 27 l/h at 47 on the pump.

As for your temp settings they look good for your room temp, but out of interest how do you attach the temp sensors for the aquaero. Do you place them on the blocks or the components. Particualrly intersted in the CPU, GPU and North bridge.


SNIFFY

Now that is forward thinking indeed. May have to dismantle my PC's to do that too. You have given me the perfect reason too.


SNIFFY

Is your Plexiglass Aquatube completely full or is there some air in it, hard to tell in the photos.

Cool, thanks for the info. I assume there will be problems removing it now the Artic silver paste has had time to cure on the components.

I have made some changes in my mind since I finished the build and I need to clean out the Cuplex XT as I think there is some sand in there from the Rad.

Just need the enthusiasm to do it, as I will have to also finish my main water cooled PC first, thats now been put back even further since your information has enlightend me.

Probably use the Artic Silver adhesive to stick the temp sensor carefully to the side of the various articles, to keep them there and provide a good heat transfer. Just a small blob would do the trick I hope, but leaving some space to allow the water block to sit unobstructed.

Cheers


SNIFFY