• 22.10.2017, 02:57
  • Registrieren
  • Anmelden
  • Sie sind nicht angemeldet.

 

Mittwoch, 30. November 2016, 11:46

So I can not install aquasuite 2017
you can install this version or the older 2016 (free) version.
When you install the 2017, you have to buy an license key after installing the aquasuite.

Sonntag, 4. Dezember 2016, 18:47

so what are the advantages going to the 2017 to entice users to pay for it?
also is the license a one time fee?
thx

Sonntag, 4. Dezember 2016, 20:28

You will get an built-in Hardwaremonitor. No need for a extern program to show CPU-temp ect. Only if a Sensor that you need, but thats not included in the AS HWM, you still can use HWinfo or OHWM.
And the AS-web function for example. If you need it.
And AS2017 supports VISION.

If you don't need one of these features, than you can stay with AS2016-5

The fee is for a single AS-Version. you need to buy a license for 2017 (or a device that already includes it) and can use that as long as you wish. for AS2018 you would need a new license or Device and so on.

Montag, 5. Dezember 2016, 09:40

And AS2017 supports VISION.

Not a real advantage to buy a license because a VISION device already comes with a license for two major versions (2017+2018).

Samstag, 10. Dezember 2016, 16:34

There's something I'm missing in Aquasuite. For the temp sensors (1 through 8), is it possible to let us "smooth" the temperature readings? I would like them to show for instance the average of the last 5 seconds (but a scale would be the best). As it is now the sensors jumps up and down several times per second, thus making the meters on my screen and the fans and pumps to jump up and down all the time. I control the cabinet fans based on the difference of the temperatures in the cabinet and in the room (2-8C) and the pumps based on the difference between the room and the water (2-5C). Because of this only small changes will get them to react. Also, which seems strange, it can take a minute or more for the sensors to reach the correct temperature after you've moved them.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »SverreMunthe« (10. Dezember 2016, 16:36)

Samstag, 10. Dezember 2016, 18:57

One more suggestion. For those of us crazy enough to run 2 pumps and/or push/pull fans it would be great if we could turn the voltage of a fan and a pump output up a tiny bit compared to another output. I think that in a series setup, like 2 pumps and push/pull fans, the rotation of the pull component should be a little bit higher, so as not to use force from the first component to speed up the second. This of course when using the same controller to control both components of the series, using 1 controller for each component is no problem, but since the number of controller are limited, which I still have a hard time understanding why is set to 4, this will cause a problem, small, but still, if my theory is correct.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »SverreMunthe« (10. Dezember 2016, 18:58)

Montag, 12. Dezember 2016, 20:17

I just did the upgrade to 2017-1.3 from 2016, while retaining old settings. I can see my gauges on the desktop, but it's in liters per hour, everything is maxed, and I can't get the Aquasuite menu to open for adjusting settings.

Update: Alright I shutdown for a few hours and tried getting the tray icon to open again. This time it opens fine. If you want any logs I can send those to you. I'm guessing it is an intermittent problem.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »zerophase« (13. Dezember 2016, 00:24)

Mittwoch, 3. Mai 2017, 22:50

I did an upgrade from the last version Aquasuite 2016 to Aquasuite 2017 for the next two years. I'm glad to do a support to Aquacomputer team this way.
The upgrade worked fine, because all my charts were back. In particular, all hardware parameters read through HWiNFO are refreshed with no problem.

I hoped to find out all features from HWiNFO directly by Aquasuite (it seemed to be the principal features of AQ2017) but it is not actually the case. Maybe could you give me some details about some fixes or future upgrades ? Please find hereafter the missing elements I need, already given by HWiNFO :
* any detail of my graphics card R9 390
  • Available by HWiNFO : VRM and GPU temps, GDDR and GPU speeds,...
* current activity of my HDDs
* any detail of my PSU Corsair RM1000i (thanks to Corsair Link 4 ?)
  • Available by HWiNFO : Power sum, temps, PSU fan speed,...
Don't hesitate to give me any beta version in order to test it. ;)
I also dream of having the data from my old mCubed T-Balancer bigNG :rolleyes:

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Kyle XY« (3. Mai 2017, 22:52)

Donnerstag, 4. Mai 2017, 06:56

The Hw monitoring in the aquasuite is a basic implementation.
When you need more data yo have to use a 3rd party software like hwinfo.

Donnerstag, 4. Mai 2017, 21:35

Ok Sebastian, thanks for your answer.

Freitag, 5. Mai 2017, 16:13

One more suggestion. For those of us crazy enough to run 2 pumps and/or push/pull fans it would be great if we could turn the voltage of a fan and a pump output up a tiny bit compared to another output. I think that in a series setup, like 2 pumps and push/pull fans, the rotation of the pull component should be a little bit higher, so as not to use force from the first component to speed up the second. This of course when using the same controller to control both components of the series, using 1 controller for each component is no problem, but since the number of controller are limited, which I still have a hard time understanding why is set to 4, this will cause a problem, small, but still, if my theory is correct.
Couldn't you just run them off different headers with the same curve but just set the starting % or volts slightly higher? So PWM1 starts at 10% but PWM2 starts at 15%. That way they rise at the same speed but keep the original difference?

Montag, 4. September 2017, 22:26

In a very old version of Aquasuite, you seemed having integrated an hysteresis feature (very useful for not having our fans running and stopping each time temperature goes through a threshold value during colding and re-heating). In Aquasuite 2017, I haven't get this one. Do you have an example to get it ? Thanks.

Montag, 11. September 2017, 22:42

Nobody ? :)

Donnerstag, 14. September 2017, 16:53

Its still there and part of the set point controller if we are talking about the aquaero:

Samstag, 16. September 2017, 22:53

Perfect, Shoggy, many thanks. I was still on curve controllers and I didn't see the other features. :rolleyes:
So, it's time for me to work on the best PID values.

Ähnliche Themen