• 29.03.2020, 07:12
  • Register
  • Login
  • You are not logged in.

 

Monday, January 20th 2020, 9:30am

OCTO has for all channels a internal Pull-UP for non compliant fans.

Tuesday, January 21st 2020, 12:17pm

The signal connection that can be connected to the motherboard.
What function does this do? Is it a safety to shutdown the computer if there is an alarm from the flow or temperature sensor?

InfoSeeker

Senior Member

uote below

Tuesday, January 21st 2020, 1:25pm

The signal connection that can be connected to the motherboard.
What function does this do? Is it a safety to shutdown the computer if there is an alarm from the flow or temperature sensor?

Quote below from the Manual... to be used in conjunction with Item # 53216 & properly configured.

Quoted

5.9. Connector “signal”
The signal output can be connected to the power switch header of the motherboard
using an additional specialized cable (53216, not included in delivery).
Pin assignment:
  • Pin 1: open drain max 3.3 V / 5 mA
  • Pin 2: do not connect!
  • Pin 3: open drain max 3.3 V / 5 mA

4WDBenio

Junior Member

Thursday, February 27th 2020, 6:18am

OCTO has for all channels a internal Pull-UP for non compliant fans.


Hi,

Can the OCTO support and control 2x Aqua Computer D5 PWM PUMPS
1) As standalone
and
2) As connected to Aquaero via OCTO?

Thank you

Thursday, February 27th 2020, 7:27am

Can the OCTO support and control 2x Aqua Computer D5 PWM PUMPS
1) As standalone
and
2) As connected to Aquaero via OCTO?


Yes, this is the same. You connect only the PWM/Tacho cable, the power for the pump come from your PSU.

Thursday, March 19th 2020, 11:33pm

Hello,

Does the octo work with Corsair ML Pros 140 the non led ones? Only I’ve just connected it all up with 6 140 ml pro and pump with 4 temp probes. 2 measuring water temp and the other 2 air temp and turned on my system and only the pumps working the fans haven’t spun up. There just off. I’ve not been able to download the software yet as I’m draining and cleaning my loop before i get everything connected up again. Cheers

This post has been edited 1 times, last edit by "Badgerslayer7" (Mar 20th 2020, 12:46am)