Vous n’êtes pas connecté.
Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.
mardi 9 août 2022, 00:31
Du kannst einen erstellten Controller mehrfach verwenden bzw. mehrfach zuweisen. Damit kannst du die Anzahl der benötigten Controller reduzieren.man kann aber nur 6 LED Controller in der aquasuite pro Strip erstellen.
Ce message a été modifié 1 fois. Dernière modification effectuée par "SCANDALOUS" (12 août 2022, 09:50)
Ja, ein OCTO und eine D5 Next, beide sind auf 6 Controller Limitiert.Citation
Denn nutzt du einen OCTO oder QUADRO für die RGGpx Funktion?
Ce message a été modifié 1 fois. Dernière modification effectuée par "zerber" (9 août 2022, 18:41)
Wie meinst du das genau bzw. wie ist das möglich?
Man kann zum Beispiel ein Controller über den kompletten Bereich von 80 LEDs legen und darüber noch mal 4 Controller (bei 4 Lüfter), welche die einzelnen Bereiche (zum Beispiel Rahmen) mit einem anderen Effekt/Farbe überschreiben.
Meinst du das oder gibt's noch mehr Möglichkeiten, die ich bisher nicht rausgefunden habe?
Ce message a été modifié 1 fois. Dernière modification effectuée par "SCANDALOUS" (12 août 2022, 10:55)
#2 - The LEDs are not individually controllable. They are mirrored in sets of 2. When I set Aquasuite to light 1 LED, 2 LEDS light up. When I set Aquasuite to light 2 LEDs, 4 LEDs light up. When I set Aquasuite to 15 LEDs, all 30 LEDs light up. I do not know why they did this. It is the only RGB fan I know of that does not have individually addressable LEDs.
The LEDs in a pair are physically located opposite of each other. It you think of the fan as a clock, LEDs 1 and 2 are tied together at the 12 o'clock position. LEDs 3 and 4 are tied together with LED 3 being at 1 o'clock and LED 4 being at 11 o'clock. LEDs 5 and 6 are tied together with LED 5 being at 2 o'clock and LED 6 being at 10 o'clock, and so on until you get to LEDs 29 and 30 which meet at 6 o'clock. This arrangement throws off the current and power calculations in a Farbwerk360 because when it thinks its driving 15 LEDs it is really driving 30 LEDs. Also, RGB effects like Laser look strange because the LED pairs are arranged in mirrored positions. I hope that how I am describing this makes sense. Its kind of hard to explain.
-